On 04/07/2024 08:50, Minda Chen wrote:
> Add Starfive JH7110 PCIe 2.0 PHY driver, which is generic
> PHY driver and can be used as USB 3.0 driver.
>
> Signed-off-by: Minda Chen <minda.c...@starfivetech.com>
> ---
> drivers/phy/starfive/Kconfig | 7 +
> drivers/phy/starfive/Makefile | 1 +
> drivers/phy/starfive/phy-jh7110-pcie.c | 202 +++++++++++++++++++++++++
> 3 files changed, 210 insertions(+)
> create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>
> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
> index 11a819f8b2..5d49684bc7 100644
> --- a/drivers/phy/starfive/Kconfig
> +++ b/drivers/phy/starfive/Kconfig
> @@ -4,6 +4,13 @@
>
> menu "Starfive PHY driver"
>
> +config PHY_STARFIVE_JH7110_PCIE
> + bool "Starfive JH7110 PCIe 2.0 PHY driver"
> + select PHY
> + help
> + Enable this to support the Starfive JH7110 PCIE 2.0/USB 3.0 PHY.
> + Generic PHY driver JH7110 USB 3.0/ PCIe 2.0.
> +
> config PHY_STARFIVE_JH7110_USB2
> bool "Starfive JH7110 USB 2.0 PHY driver"
> select PHY
> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
> index a405a75e34..82f25aa21b 100644
> --- a/drivers/phy/starfive/Makefile
> +++ b/drivers/phy/starfive/Makefile
> @@ -3,4 +3,5 @@
> # Copyright (C) 2023 Starfive
> #
>
> +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
> obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
> diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c
> b/drivers/phy/starfive/phy-jh7110-pcie.c
> new file mode 100644
> index 0000000000..57d5d8bf53
> --- /dev/null
> +++ b/drivers/phy/starfive/phy-jh7110-pcie.c
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * StarFive JH7110 PCIe 2.0 PHY driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + * Author: Minda Chen <minda.c...@starfivetech.com>
> + */
> +#include <asm/io.h>
> +#include <dm.h>
> +#include <dm/device_compat.h>
> +#include <errno.h>
> +#include <generic-phy.h>
> +#include <regmap.h>
> +#include <soc.h>
> +#include <syscon.h>
> +#include <linux/bitops.h>
> +#include <linux/err.h>
> +
> +#define PCIE_KVCO_LEVEL_OFF 0x28
> +#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c
> +#define PCIE_USB3_PHY_SS_MODE BIT(4)
> +#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80
> +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
> +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
> +
> +#define USB_PDRSTN_SPLIT BIT(17)
> +
> +#define PCIE_USB3_PHY_MODE BIT(20)
> +#define PCIE_PHY_MODE_MASK GENMASK(21, 20)
> +#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2)
> +#define PCIE_BUS_WIDTH BIT(3)
> +#define PCIE_USB3_RATE_MASK GENMASK(6, 5)
> +#define PCIE_USB3_RX_STANDBY_MASK BIT(7)
> +#define PCIE_USB3_PHY_ENABLE BIT(4)
> +
> +struct jh7110_pcie_phy {
> + struct phy *phy;
> + struct regmap *stg_syscon;
> + struct regmap *sys_syscon;
> + void __iomem *regs;
> + u32 sys_phy_connect;
> + u32 stg_pcie_mode;
> + u32 stg_pcie_usb;
> + enum phy_mode mode;
> +};
> +
> +static int phy_pcie_mode_set(struct jh7110_pcie_phy *data, bool usb_mode)
> +{
> + unsigned int phy_mode, width, usb3_phy, ss_mode;
> +
> + /* default is PCIe mode */
> + if (!data->stg_syscon || !data->sys_syscon) {
> + if (usb_mode) {
> + dev_err(data->phy->dev, "doesn't support usb3 mode\n");
> + return -EINVAL;
> + }
> + return 0;
> + }
> +
> + if (usb_mode) {
> + phy_mode = PCIE_USB3_PHY_MODE;
> + width = 0;
> + usb3_phy = PCIE_USB3_PHY_ENABLE;
> + ss_mode = PCIE_USB3_PHY_SS_MODE;
> + } else {
> + phy_mode = 0;
> + width = PCIE_BUS_WIDTH;
> + usb3_phy = 0;
> + ss_mode = 0;
> + }
> +
> + regmap_update_bits(data->stg_syscon, data->stg_pcie_mode,
> + PCIE_PHY_MODE_MASK, phy_mode);
> + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb,
> + PCIE_USB3_BUS_WIDTH_MASK, width);
> + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb,
> + PCIE_USB3_PHY_ENABLE, usb3_phy);
> + clrsetbits_le32(data->regs + PCIE_USB3_PHY_PLL_CTL_OFF,
> + PCIE_USB3_PHY_SS_MODE, ss_mode);
> +
> + regmap_update_bits(data->sys_syscon, data->sys_phy_connect,
> + USB_PDRSTN_SPLIT, 0);
> +
> + return 0;
> +}
> +
> +static void phy_kvco_gain_set(struct jh7110_pcie_phy *phy)
> +{
> + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
> + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
> + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs +
> PCIE_KVCO_TUNE_SIGNAL_OFF);
> +}
> +
> +static int jh7110_pcie_phy_set_mode(struct phy *_phy,
> + enum phy_mode mode, int submode)
> +{
> + struct udevice *dev = _phy->dev;
> + struct jh7110_pcie_phy *phy = dev_get_priv(dev);
> + int ret;
> +
> + if (mode == phy->mode)
> + return 0;
> +
> + switch (mode) {
> + case PHY_MODE_USB_HOST:
> + case PHY_MODE_USB_DEVICE:
> + case PHY_MODE_USB_OTG:
> + ret = phy_pcie_mode_set(phy, 1);
> + if (ret)
> + return ret;
> + break;
> + case PHY_MODE_PCIE:
> + phy_pcie_mode_set(phy, 0);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + dev_dbg(_phy->dev, "Changing phy mode to %d\n", mode);
> + phy->mode = mode;
> +
> + return 0;
> +}
> +
> +static const struct phy_ops jh7110_pcie_phy_ops = {
> + .set_mode = jh7110_pcie_phy_set_mode,
> +};
> +
> +static int starfive_pcie_phy_get_syscon(struct udevice *dev)
> +{
> + struct jh7110_pcie_phy *phy = dev_get_priv(dev);
> + struct ofnode_phandle_args sys_phandle, stg_phandle;
> + int ret;
> +
> + /* get corresponding syscon phandle */
> + ret = dev_read_phandle_with_args(dev, "starfive,sys-syscon", NULL, 1, 0,
> + &sys_phandle);
> +
> + if (ret < 0) {
> + dev_err(dev, "Can't get sys cfg phandle: %d\n", ret);
> + return ret;
> + }
> +
> + ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 2, 0,
> + &stg_phandle);
> +
> + if (ret < 0) {
> + dev_err(dev, "Can't get stg cfg phandle: %d\n", ret);
> + return ret;
> + }
> +
> + phy->sys_syscon = syscon_node_to_regmap(sys_phandle.node);
> + if (!IS_ERR_OR_NULL(phy->sys_syscon)) {
> + /* get syscon register offset */
> + phy->sys_phy_connect = sys_phandle.args[0];
> + } else {
> + phy->sys_syscon = NULL;
> + }
> +
> + phy->stg_syscon = syscon_node_to_regmap(stg_phandle.node);
> + if (!IS_ERR_OR_NULL(phy->stg_syscon)) {
> + phy->stg_pcie_mode = stg_phandle.args[0];
> + phy->stg_pcie_usb = stg_phandle.args[1];
> + } else {
> + phy->stg_syscon = NULL;
> + }
> +
> + return 0;
> +}
> +
> +int jh7110_pcie_phy_probe(struct udevice *dev)
> +{
> + struct jh7110_pcie_phy *phy = dev_get_priv(dev);
> + int rc;
> +
> + phy->regs = dev_read_addr_ptr(dev);
> + if (!phy->regs)
> + return -EINVAL;
> +
> + rc = starfive_pcie_phy_get_syscon(dev);
> + if (rc)
> + return rc;
> +
> + phy_kvco_gain_set(phy);
> +
> + return 0;
> +}
> +
> +static const struct udevice_id jh7110_pcie_phy[] = {
> + { .compatible = "starfive,jh7110-pcie-phy"},
> + {},
> +};
> +
> +U_BOOT_DRIVER(jh7110_pcie_phy) = {
> + .name = "jh7110_pcie_phy",
> + .id = UCLASS_PHY,
> + .of_match = jh7110_pcie_phy,
> + .probe = jh7110_pcie_phy_probe,
> + .ops = &jh7110_pcie_phy_ops,
> + .priv_auto = sizeof(struct jh7110_pcie_phy),
> +};
> +
Please drop the new blank line at the end.
--
cheers,
-roger
