The current calculation will omit doing a flush/invalidate on the last
cacheline if the base address is not aligned with DMA_MINALIGN.

This causes commands failures and write corruptions on Qualcomm
platforms.

Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
 drivers/ufs/ufs.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
index bc86903245c..db487d1ff9a 100644
--- a/drivers/ufs/ufs.c
+++ b/drivers/ufs/ufs.c
@@ -704,11 +704,11 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
  */
 static void ufshcd_cache_flush_and_invalidate(void *addr, unsigned long size)
 {
-       uintptr_t aaddr = (uintptr_t)addr & ~(ARCH_DMA_MINALIGN - 1);
-       unsigned long asize = ALIGN(size, ARCH_DMA_MINALIGN);
+       uintptr_t start_addr = (uintptr_t)addr & ~(ARCH_DMA_MINALIGN - 1);
+       uintptr_t end_addr = ALIGN((uintptr_t)addr + size, ARCH_DMA_MINALIGN);
 
-       flush_dcache_range(aaddr, aaddr + asize);
-       invalidate_dcache_range(aaddr, aaddr + asize);
+       flush_dcache_range(start_addr, end_addr);
+       invalidate_dcache_range(start_addr, end_addr);
 }
 
 /**
@@ -1467,13 +1467,13 @@ static void prepare_prdt_table(struct ufs_hba *hba, 
struct scsi_cmd *pccb)
        }
 
        if (pccb->dma_dir == DMA_TO_DEVICE) {   /* Write to device */
-               flush_dcache_range(aaddr, aaddr +
-                                  ALIGN(datalen, ARCH_DMA_MINALIGN));
+               flush_dcache_range(aaddr,
+                                  ALIGN((uintptr_t)pccb->pdata + datalen, 
ARCH_DMA_MINALIGN));
        }
 
        /* In any case, invalidate cache to avoid stale data in it. */
-       invalidate_dcache_range(aaddr, aaddr +
-                               ALIGN(datalen, ARCH_DMA_MINALIGN));
+       invalidate_dcache_range(aaddr,
+                               ALIGN((uintptr_t)pccb->pdata + datalen, 
ARCH_DMA_MINALIGN));
 
        table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY);
        buf = pccb->pdata;

-- 
2.34.1

Reply via email to