[PATCH 4/4] ufs: use dcache helpers for scsi_cmd data and only invalidate if necessary

[Neil Armstrong]

Now we have proper flush and invalidate helpers, we can use them
directly to operate on the scsi_cmd data.

Likewise, we do not need to flush then invalidate, just flush _or_
invalidate depending on the data direction.

Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
 drivers/ufs/ufs.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
index 76cda83ce81..646d4856e9c 100644
--- a/drivers/ufs/ufs.c
+++ b/drivers/ufs/ufs.c
@@ -1469,7 +1469,6 @@ static void prepare_prdt_table(struct ufs_hba *hba, 
struct scsi_cmd *pccb)
 {
        struct utp_transfer_req_desc *req_desc = hba->utrdl;
        struct ufshcd_sg_entry *prd_table = hba->ucd_prdt_ptr;
-       uintptr_t aaddr = (uintptr_t)(pccb->pdata) & ~(ARCH_DMA_MINALIGN - 1);
        ulong datalen = pccb->datalen;
        int table_length;
        u8 *buf;
@@ -1481,14 +1480,10 @@ static void prepare_prdt_table(struct ufs_hba *hba, 
struct scsi_cmd *pccb)
                return;
        }
 
-       if (pccb->dma_dir == DMA_TO_DEVICE) {   /* Write to device */
-               flush_dcache_range(aaddr,
-                                  ALIGN((uintptr_t)pccb->pdata + datalen, 
ARCH_DMA_MINALIGN));
-       }
-
-       /* In any case, invalidate cache to avoid stale data in it. */
-       invalidate_dcache_range(aaddr,
-                               ALIGN((uintptr_t)pccb->pdata + datalen, 
ARCH_DMA_MINALIGN));
+       if (pccb->dma_dir == DMA_TO_DEVICE)
+               ufshcd_cache_flush(pccb->pdata, datalen);
+       else
+               ufshcd_cache_invalidate(pccb->pdata, datalen);
 
        table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY);
        buf = pccb->pdata;

-- 
2.34.1