On 7/28/24 7:55 PM, Svyatoslav Ryhel wrote:
нд, 28 лип. 2024 р. о 19:38 Marek Vasut <ma...@denx.de> пише:
On 6/27/24 1:55 AM, Marek Vasut wrote:
In case a regulator DT node contains regulator-always-on or regulator-boot-on
property, make sure the regulator gets correctly configured by U-Boot on start
up. Unconditionally probe such regulator drivers. This is a preparatory patch
for introduction of .regulator_post_probe() which would trigger the regulator
configuration.
Parsing of regulator-always-on and regulator-boot-on DT property has been
moved to regulator_post_bind() as the information is required early, the
rest of the DT parsing has been kept in regulator_pre_probe() to avoid
slowing down the boot process.
Is there anything blocking this series from being applied ?
This patchset causes PMIC regulators probe too early which results in
i2c line setup failure. These patches MUST NOT be applied in this form
since they will break at least 15 Tegra 3 devices which use DM PMIC,
maybe more.
Thank you for testing. I do not have any tegra 3 devices, but this
patchset does not do anything with pinmuxing. If a regulator is probed,
all of its dependencies (i2c bus, pinmux configuration, etc.) should be
probed as well. Can you have a look at what the problem with pinmuxing
is on tegra 3? It seems it might be unrelated to this patchset and would
eventually show up elsewhere?
