Drop all of these configs, which are now unused. Signed-off-by: Simon Glass <s...@chromium.org> ---
drivers/led/Kconfig | 316 -------------------------------------------- 1 file changed, 316 deletions(-) diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 32f0eade710..f4d47d0f327 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -114,320 +114,4 @@ config SPL_LED_GPIO endif # LED -config LED_STATUS - bool "Enable status LED API" - help - Allows common u-boot commands to use a board's leds to - provide status for activities like booting and downloading files. - -if LED_STATUS - -# Hidden constants - -config LED_STATUS_OFF - int - default 0 - -config LED_STATUS_BLINKING - int - default 1 - -config LED_STATUS_ON - int - default 2 - -# Hidden constants end - -config LED_STATUS_GPIO - bool "GPIO status LED implementation" - help - The status LED can be connected to a GPIO pin. In such cases, the - gpio_led driver can be used as a status LED backend implementation. - -comment "LEDs parameters" - -config LED_STATUS0 - bool "Enable status LED 0" - -if LED_STATUS0 - -config LED_STATUS_BIT - int "identification" - help - CONFIG_LED_STATUS_BIT is passed into the __led_* functions to identify - which LED is being acted on. As such, the chosen value must be unique - with respect to the other CONFIG_LED_STATUS_BIT's. Mapping the value - to a physical LED is the responsibility of the __led_* function. - -config LED_STATUS_STATE - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ: - LED_STATUS_PERIOD = CONFIG_SYS_HZ/LED_STATUS_FREQ - Values range: 2 - 10 - -endif # LED_STATUS0 - -config LED_STATUS1 - bool "Enable status LED 1" - -if LED_STATUS1 - -config LED_STATUS_BIT1 - int "identification" - help - CONFIG_LED_STATUS_BIT1 is passed into the __led_* functions to - identify which LED is being acted on. As such, the chosen value must - be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping - the value to a physical LED is the responsibility of the __led_* - function. - -config LED_STATUS_STATE1 - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ1 - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ1: - LED_STATUS_PERIOD1 = CONFIG_SYS_HZ/LED_STATUS_FREQ1 - Values range: 2 - 10 - -endif # LED_STATUS1 - -config LED_STATUS2 - bool "Enable status LED 2" - -if LED_STATUS2 - -config LED_STATUS_BIT2 - int "identification" - help - CONFIG_LED_STATUS_BIT2 is passed into the __led_* functions to - identify which LED is being acted on. As such, the chosen value must - be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping - the value to a physical LED is the responsibility of the __led_* - function. - -config LED_STATUS_STATE2 - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ2 - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ2: - LED_STATUS_PERIOD2 = CONFIG_SYS_HZ/LED_STATUS_FREQ2 - Values range: 2 - 10 - -endif # LED_STATUS2 - -config LED_STATUS3 - bool "Enable status LED 3" - -if LED_STATUS3 - -config LED_STATUS_BIT3 - int "identification" - help - CONFIG_LED_STATUS_BIT3 is passed into the __led_* functions to - identify which LED is being acted on. As such, the chosen value must - be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping - the value to a physical LED is the responsibility of the __led_* - function. - -config LED_STATUS_STATE3 - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ3 - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ3: - LED_STATUS_PERIOD3 = CONFIG_SYS_HZ/LED_STATUS_FREQ3 - Values range: 2 - 10 - -endif # LED_STATUS3 - -config LED_STATUS4 - bool "Enable status LED 4" - -if LED_STATUS4 - -config LED_STATUS_BIT4 - int "identification" - help - CONFIG_LED_STATUS_BIT4 is passed into the __led_* functions to - identify which LED is being acted on. As such, the chosen value must - be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping - the value to a physical LED is the responsibility of the __led_* - function. - -config LED_STATUS_STATE4 - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ4 - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ4: - LED_STATUS_PERIOD4 = CONFIG_SYS_HZ/LED_STATUS_FREQ4 - Values range: 2 - 10 - -endif # LED_STATUS4 - -config LED_STATUS5 - bool "Enable status LED 5" - -if LED_STATUS5 - -config LED_STATUS_BIT5 - int "identification" - help - CONFIG_LED_STATUS_BIT5 is passed into the __led_* functions to - identify which LED is being acted on. As such, the chosen value must - be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping - the value to a physical LED is the responsibility of the __led_* - function. - -config LED_STATUS_STATE5 - int "initial state" - range LED_STATUS_OFF LED_STATUS_ON - default LED_STATUS_OFF - help - Should be set one of the following: - 0 - off - 1 - blinking - 2 - on - -config LED_STATUS_FREQ5 - int "blink frequency" - range 2 10 - default 2 - help - The LED blink period calculated from LED_STATUS_FREQ5: - LED_STATUS_PERIOD5 = CONFIG_SYS_HZ/LED_STATUS_FREQ5 - Values range: 2 - 10 - -endif # LED_STATUS5 - -config LED_STATUS_BOOT_ENABLE - bool "Enable BOOT LED" - help - Enable to turn an LED on when the board is booting. - -if LED_STATUS_BOOT_ENABLE - -config LED_STATUS_BOOT - int "LED to light when the board is booting" - help - Valid enabled LED device number. - -endif # LED_STATUS_BOOT_ENABLE - -config LED_STATUS_RED_ENABLE - bool "Enable red LED" - help - Enable red status LED. - -if LED_STATUS_RED_ENABLE - -config LED_STATUS_RED - int "Red LED identification" - help - Valid enabled LED device number. - -endif # LED_STATUS_RED_ENABLE - -config LED_STATUS_YELLOW_ENABLE - bool "Enable yellow LED" - help - Enable yellow status LED. - -if LED_STATUS_YELLOW_ENABLE - -config LED_STATUS_YELLOW - int "Yellow LED identification" - help - Valid enabled LED device number. - -endif # LED_STATUS_YELLOW_ENABLE - -config LED_STATUS_BLUE_ENABLE - bool "Enable blue LED" - help - Enable blue status LED. - -if LED_STATUS_BLUE_ENABLE - -config LED_STATUS_BLUE - int "Blue LED identification" - help - Valid enabled LED device number. - -endif # LED_STATUS_BLUE_ENABLE - -config LED_STATUS_GREEN_ENABLE - bool "Enable green LED" - help - Enable green status LED. - -if LED_STATUS_GREEN_ENABLE - -config LED_STATUS_GREEN - int "Green LED identification" - help - Valid enabled LED device number (0-5). - -endif # LED_STATUS_GREEN_ENABLE - -config LED_STATUS_CMD - bool "Enable status LED commands" - -endif # LED_STATUS - endmenu -- 2.43.0
