This driver is not used anymore. Drop it.
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/misc/Kconfig | 13 ---
drivers/misc/Makefile | 1 -
drivers/misc/pca9551_led.c | 170 -------------------------------------
3 files changed, 184 deletions(-)
delete mode 100644 drivers/misc/pca9551_led.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6009d55f400..23eb509d974 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -446,19 +446,6 @@ config SPL_PWRSEQ
device. When the device is started up, its power sequence can be
initiated.
-config PCA9551_LED
- bool "Enable PCA9551 LED driver"
- help
- Enable driver for PCA9551 LED controller. This controller
- is connected via I2C. So I2C needs to be enabled.
-
-config PCA9551_I2C_ADDR
- hex "I2C address of PCA9551 LED controller"
- depends on PCA9551_LED
- default 0x60
- help
- The I2C address of the PCA9551 LED controller.
-
config STM32MP_FUSE
bool "Enable STM32MP fuse wrapper providing the fuse API"
depends on ARCH_STM32MP && MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c4941377b7d..03d87ef8a0e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_NPCM_OTP) += npcm_otp.o
obj-$(CONFIG_NPCM_HOST) += npcm_host_intf.o
obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
obj-$(CONFIG_P2SB) += p2sb-uclass.o
-obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
ifdef CONFIG_QFW
obj-y += qfw.o
diff --git a/drivers/misc/pca9551_led.c b/drivers/misc/pca9551_led.c
deleted file mode 100644
index 040d0d5cf48..00000000000
--- a/drivers/misc/pca9551_led.c
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Stefan Roese <s...@denx.de>
- */
-
-#include <errno.h>
-#include <i2c.h>
-#include <status_led.h>
-
-#ifndef CONFIG_PCA9551_I2C_ADDR
-#error "CONFIG_PCA9551_I2C_ADDR not defined!"
-#endif
-
-#define PCA9551_REG_INPUT 0x00 /* Input register (read only) */
-#define PCA9551_REG_PSC0 0x01 /* Frequency prescaler 0 */
-#define PCA9551_REG_PWM0 0x02 /* PWM0 */
-#define PCA9551_REG_PSC1 0x03 /* Frequency prescaler 1 */
-#define PCA9551_REG_PWM1 0x04 /* PWM1 */
-#define PCA9551_REG_LS0 0x05 /* LED0 to LED3 selector */
-#define PCA9551_REG_LS1 0x06 /* LED4 to LED7 selector */
-
-#define PCA9551_CTRL_AI (1 << 4) /* Auto-increment flag
*/
-
-#define PCA9551_LED_STATE_ON 0x00
-#define PCA9551_LED_STATE_OFF 0x01
-#define PCA9551_LED_STATE_BLINK0 0x02
-#define PCA9551_LED_STATE_BLINK1 0x03
-
-struct pca9551_blink_rate {
- u8 psc; /* Frequency preescaler, see PCA9551_7.pdf p. 6 */
- u8 pwm; /* Pulse width modulation, see PCA9551_7.pdf p. 6 */
-};
-
-static int freq_last = -1;
-static int mask_last = -1;
-static int idx_last = -1;
-static int mode_last;
-
-static int pca9551_led_get_state(int led, int *state)
-{
- unsigned int reg;
- u8 shift, buf;
- int ret;
-
- if (led < 0 || led > 7) {
- return -EINVAL;
- } else if (led < 4) {
- reg = PCA9551_REG_LS0;
- shift = led << 1;
- } else {
- reg = PCA9551_REG_LS1;
- shift = (led - 4) << 1;
- }
-
- ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
- if (ret)
- return ret;
-
- *state = (buf >> shift) & 0x03;
- return 0;
-}
-
-static int pca9551_led_set_state(int led, int state)
-{
- unsigned int reg;
- u8 shift, buf, mask;
- int ret;
-
- if (led < 0 || led > 7) {
- return -EINVAL;
- } else if (led < 4) {
- reg = PCA9551_REG_LS0;
- shift = led << 1;
- } else {
- reg = PCA9551_REG_LS1;
- shift = (led - 4) << 1;
- }
- mask = 0x03 << shift;
-
- ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
- if (ret)
- return ret;
-
- buf = (buf & ~mask) | ((state & 0x03) << shift);
-
- ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int pca9551_led_set_blink_rate(int idx, struct pca9551_blink_rate rate)
-{
- unsigned int reg;
- int ret;
-
- switch (idx) {
- case 0:
- reg = PCA9551_REG_PSC0;
- break;
- case 1:
- reg = PCA9551_REG_PSC1;
- break;
- default:
- return -EINVAL;
- }
- reg |= PCA9551_CTRL_AI;
-
- ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, (u8 *)&rate, 2);
- if (ret)
- return ret;
-
- return 0;
-}
-
-/*
- * Functions referenced by cmd_led.c or status_led.c
- */
-void __led_init(led_id_t id, int state)
-{
-}
-
-void __led_set(led_id_t mask, int state)
-{
- if (state == CONFIG_LED_STATUS_OFF)
- pca9551_led_set_state(mask, PCA9551_LED_STATE_OFF);
- else
- pca9551_led_set_state(mask, PCA9551_LED_STATE_ON);
-}
-
-void __led_toggle(led_id_t mask)
-{
- int state = 0;
-
- pca9551_led_get_state(mask, &state);
- pca9551_led_set_state(mask, !state);
-}
-
-void __led_blink(led_id_t mask, int freq)
-{
- struct pca9551_blink_rate rate;
- int mode;
- int idx;
-
- if ((freq == freq_last) || (mask == mask_last)) {
- idx = idx_last;
- mode = mode_last;
- } else {
- /* Toggle blink index */
- if (idx_last == 0) {
- idx = 1;
- mode = PCA9551_LED_STATE_BLINK1;
- } else {
- idx = 0;
- mode = PCA9551_LED_STATE_BLINK0;
- }
-
- idx_last = idx;
- mode_last = mode;
- }
- freq_last = freq;
- mask_last = mask;
-
- rate.psc = ((freq * 38) / 1000) - 1;
- rate.pwm = 128; /* 50% duty cycle */
-
- pca9551_led_set_blink_rate(idx, rate);
- pca9551_led_set_state(mask, mode);
-}
--
2.43.0
