Hi, Fabio,
2011/5/17 Fabio Estevam <fabio.este...@freescale.com>:
> Make the weim register set complete for MX51/MX53.
>
> While at it also add the weim chip select 1 address definition.
>
>From the code, you just add the cs for mx53 not for mx51, so,
Had better specify you add the cs1 address definition for mx53,
otherwise, it will make confusion.
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> Changes since v1:
> - Make the weim struct complete
>
> arch/arm/include/asm/arch-mx5/imx-regs.h | 46
> ++++++++++++++++++++++++++----
> 1 files changed, 40 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h
> b/arch/arm/include/asm/arch-mx5/imx-regs.h
> index a1849f8..d80e0c0 100644
> --- a/arch/arm/include/asm/arch-mx5/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
> @@ -41,6 +41,7 @@
> #define CSD1_BASE_ADDR 0xB0000000
> #define NFC_BASE_ADDR_AXI 0xF7FF0000
> #define IRAM_BASE_ADDR 0xF8000000
> +#define CS1_BASE_ADDR 0xF4000000
> #else
> #error "CPU_TYPE not defined"
> #endif
> @@ -231,12 +232,45 @@ struct clkctl {
>
Jason Liu
> --
> 1.6.0.4
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
