The DBGMCU block is available at address 0x50081000 both on STM32MP13xx and on STM32MP15xx . There is no reason to limit the DBGMCU macro being set only on STM32MP15xx , remove the ifdeffery.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: Simon Glass <[email protected]> Cc: Sughosh Ganu <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] Cc: [email protected] --- arch/arm/mach-stm32mp/include/mach/stm32.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 47b459b75d1..dfba57e7dc4 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -78,9 +78,7 @@ enum forced_boot_mode { #define STM32_RCC_BASE 0x50000000 #define STM32_PWR_BASE 0x50001000 #define STM32_SYSCFG_BASE 0x50020000 -#ifdef CONFIG_STM32MP15X #define STM32_DBGMCU_BASE 0x50081000 -#endif #define STM32_FMC2_BASE 0x58002000 #define STM32_IWDG2_BASE 0x5A002000 #define STM32_DDRCTRL_BASE 0x5A003000 -- 2.47.2
