On 5/21/25 15:59, Patrice CHOTARD wrote:
>
>
> On 5/12/25 18:44, Marek Vasut wrote:
>> The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
>> and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
>> set only on STM32MP15xx , remove the ifdeffery.
>>
>> Signed-off-by: Marek Vasut <marek.va...@mailbox.org>
>> ---
>> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
>> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
>> Cc: Simon Glass <s...@chromium.org>
>> Cc: Sughosh Ganu <sughosh.g...@linaro.org>
>> Cc: Tom Rini <tr...@konsulko.com>
>> Cc: u-boot@lists.denx.de
>> Cc: uboot-st...@st-md-mailman.stormreply.com
>> ---
>> arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
>> 1 file changed, 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h
>> b/arch/arm/mach-stm32mp/include/mach/stm32.h
>> index 47b459b75d1..dfba57e7dc4 100644
>> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
>> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
>> @@ -78,9 +78,7 @@ enum forced_boot_mode {
>> #define STM32_RCC_BASE 0x50000000
>> #define STM32_PWR_BASE 0x50001000
>> #define STM32_SYSCFG_BASE 0x50020000
>> -#ifdef CONFIG_STM32MP15X
>> #define STM32_DBGMCU_BASE 0x50081000
>> -#endif
>> #define STM32_FMC2_BASE 0x58002000
>> #define STM32_IWDG2_BASE 0x5A002000
>> #define STM32_DDRCTRL_BASE 0x5A003000
>
> Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
>
> Thanks
> Patrice
Applied to u-boot-stm32/next
Thanks
Patrice
