Hi Jerome, Am Dienstag, dem 09.09.2025 um 11:58 +0200 schrieb Jerome Forissier: > Hi Yannic, > > On 9/8/25 08:34, Yannic Moog wrote: > > Use single make command for compiling blobs and U-Boot. > > Update the imx firmware version. > > > > Signed-off-by: Yannic Moog <[email protected]> > > --- > > doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++-------- > > doc/board/phytec/phycore-imx8mm.rst | 28 ++++++++++++++-------- > > doc/board/phytec/phycore-imx8mp.rst | 36 +++++++++++++++++--------- > > --- > > 3 files changed, 56 insertions(+), 35 deletions(-) > > > > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > index > > 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e > > 723dbb 100644 > > --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary > > > > $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > > $ cd trusted-firmware-a > > - $ export CROSS_COMPILE=aarch64-linux-gnu- > > - $ export IMX_BOOT_UART_BASE=0x30880000 > > - $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31 > > + $ make -j $(nproc) \ > > + CROSS_COMPILE=aarch64-linux-gnu- \ > > + PLAT=imx8mm \ > > + IMX_BOOT_UART_BASE=0x30880000 \ > > + BL32_BASE=0xbe000000 \ > > + SPD=opteed \ > > + bl31 > > > > Build the OP-TEE binary > > ----------------------- > > @@ -32,8 +36,9 @@ Build the OP-TEE binary > > > > $ git clone https://github.com/OP-TEE/optee_os.git > > $ cd optee_os > > - $ make CFG_TEE_BENCHMARK=n \ > > + $ make -j $(nproc) \ > > CROSS_COMPILE=aarch64-linux-gnu- \ > > + CFG_TEE_BENCHMARK=n \ > > This CFG has been removed from optee_os since 4.2.0 and has never been enabled > by default, so I would think there is no need to set it to n here.
Thanks for the info, will remove it. Should we remove it from the optee doc as well then? https://optee.readthedocs.io/en/latest/building/gits/optee_os.html#build-using-gnu-make Yannic > > Thanks,
