From: "J. Neuschäfer" <[email protected]> README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <[email protected]> --- Changes in v2: - Use a proper link within ReST (thanks to Heinrich Schuchardt's review) - Link to v1: https://lore.kernel.org/r/[email protected] --- cmd/Kconfig | 4 ++-- common/spl/Kconfig | 2 +- doc/board/ti/am335x_evm.rst | 2 +- doc/develop/falcon.rst | 1 + 4 files changed, 5 insertions(+), 4 deletions(-) diff --git a/cmd/Kconfig b/cmd/Kconfig index b71ac554c0b..fca2a0b0e39 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -620,7 +620,7 @@ config CMD_SPL help Falcon mode allows booting directly from SPL into an Operating System such as Linux, thus skipping U-Boot proper. See - doc/README.falcon for full information about how to use this + doc/develop/falcon.rst for full information about how to use this command. config CMD_SPL_NAND_OFS @@ -629,7 +629,7 @@ config CMD_SPL_NAND_OFS default 0x0 help This provides the offset of the command line arguments for Linux - when booting from NAND in Falcon mode. See doc/README.falcon + when booting from NAND in Falcon mode. See doc/develop/falcon.rst for full information about how to use this option (and also see board/gateworks/gw_ventana/README for an example). diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 4b10e9c3880..f0612acf0c2 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1209,7 +1209,7 @@ config SPL_OS_BOOT depends on ARM || MICROBLAZE || PPC help Enable booting directly to an OS from SPL. - for more info read doc/README.falcon + for more info read doc/develop/falcon.rst config SPL_OS_BOOT_SECURE bool "Allow Falcon Mode on secure devices" diff --git a/doc/board/ti/am335x_evm.rst b/doc/board/ti/am335x_evm.rst index 40e144948a3..b14ba41917e 100644 --- a/doc/board/ti/am335x_evm.rst +++ b/doc/board/ti/am335x_evm.rst @@ -274,7 +274,7 @@ into memory, then written to NAND. Falcon Mode ----------- -The default build includes "Falcon Mode" (see doc/README.falcon) via NAND, +The default build includes :ref:`falcon-mode` via NAND, eMMC (or raw SD cards) and FAT SD cards. Our default behavior currently is to read a 'c' on the console while in SPL at any point prior to loading the OS payload (so as soon as possible) to opt to booting full U-Boot. Also diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index 528a9c389bf..3fc23f65c45 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0-or-later +.. _falcon-mode: Falcon Mode =========== --- base-commit: 4933a0e67578789a57f540a378ce0698435b7b17 change-id: 20251231-falcon-7a97211ecbbe Best regards, -- J. Neuschäfer <[email protected]>
