Dear "Ira W. Snyder", In message <20110714185958.ge19...@ovro.caltech.edu> you wrote: > > Does anyone have a BDI2000 configuration for the P2020DS that they could > share with me?
Abatron ships a p2020ds.cfg with their firmware for the BDI. Do you think this is not working or not good enough? > The documentation Freescale sent me claims that U-Boot is in a 4MB SPI > flash, however, the U-Boot that came with the board is unable to > initialize the SPI subsystem per their instructions. ... > I thought I'd use the BDI2000 to dump a copy of their U-Boot before I > replace it with my own, just for good measure. Well, if it's really in SPI flash, then the BDI will not help you to dump it. The BDI cannot access SPI flash directly. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "A complex system that works is invariably found to have evolved from a simple system that worked." - John Gall, _Systemantics_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot