The &cpu_thermal node was added at the wrong position, move it to the correctly sorted one.
Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patch.msgid.link/[email protected] [ upstream commit: 15efa2414602ad4c411ea8d4113b87656ebe0737 ] (cherry picked from commit 0ac36d180d89464e8dda0287cee633ad71c43211) --- .../src/arm64/rockchip/rk3568-qnap-ts433.dts | 96 +++++++++---------- 1 file changed, 48 insertions(+), 48 deletions(-) diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index 6ae4316761c..5656554ca28 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -196,6 +196,54 @@ cpu-supply = <&vdd_cpu>; }; +/* + * The MCU can provide system temperature too, but only by polling and of + * course also cannot set trip points. So attach to the cpu thermal-zone + * instead to control the fan. + */ +&cpu_thermal { + trips { + case_fan0: case-fan0 { + hysteresis = <2000>; + temperature = <35000>; + type = "active"; + }; + + case_fan1: case-fan1 { + hysteresis = <2000>; + temperature = <45000>; + type = "active"; + }; + + case_fan2: case-fan2 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + /* + * Always provide some air movement, due to small case + * full of harddrives. + */ + map1 { + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + trip = <&case_fan0>; + }; + + map2 { + cooling-device = <&fan 2 3>; + trip = <&case_fan1>; + }; + + map3 { + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + trip = <&case_fan2>; + }; + }; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -492,54 +540,6 @@ }; }; -/* - * The MCU can provide system temperature too, but only by polling and of - * course also cannot set trip points. So attach to the cpu thermal-zone - * instead to control the fan. - */ -&cpu_thermal { - trips { - case_fan0: case-fan0 { - hysteresis = <2000>; - temperature = <35000>; - type = "active"; - }; - - case_fan1: case-fan1 { - hysteresis = <2000>; - temperature = <45000>; - type = "active"; - }; - - case_fan2: case-fan2 { - hysteresis = <2000>; - temperature = <65000>; - type = "active"; - }; - }; - - cooling-maps { - /* - * Always provide some air movement, due to small case - * full of harddrives. - */ - map1 { - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - trip = <&case_fan0>; - }; - - map2 { - cooling-device = <&fan 2 3>; - trip = <&case_fan1>; - }; - - map3 { - cooling-device = <&fan 4 THERMAL_NO_LIMIT>; - trip = <&case_fan2>; - }; - }; -}; - &pcie30phy { data-lanes = <1 2>; status = "okay"; -- 2.47.2
