Switch remaining rk3288 boards to upstream devicetree.
Signed-off-by: Johan Jonker <[email protected]>
---
Changed V3:
Makefile
MAINTAINERS
---
arch/arm/dts/Makefile | 7 -
...boot.dtsi => rk3288-evb-rk808-u-boot.dtsi} | 0
arch/arm/dts/rk3288-evb.dts | 20 -
arch/arm/dts/rk3288-evb.dtsi | 476 ---------------
arch/arm/dts/rk3288-popmetal.dts | 20 -
arch/arm/dts/rk3288-popmetal.dtsi | 547 ------------------
arch/arm/dts/rk3288-rock-pi-n8.dts | 17 -
arch/arm/dts/rk3288-rock2-som.dtsi | 278 ---------
arch/arm/dts/rk3288-rock2-square.dts | 181 ------
arch/arm/dts/rk3288-vmarc-som.dtsi | 361 ------------
arch/arm/dts/rk3288-vyasa.dts | 473 ---------------
.../dts/rockchip-radxa-dalang-carrier.dtsi | 137 -----
board/amarula/vyasa-rk3288/MAINTAINERS | 1 -
board/chipspark/popmetal_rk3288/MAINTAINERS | 1 -
board/rockchip/evb_rk3288/MAINTAINERS | 6 +-
...8_defconfig => evb-rk3288-rk808_defconfig} | 5 +-
configs/phycore-rk3288_defconfig | 2 +-
configs/popmetal-rk3288_defconfig | 5 +-
configs/rock-pi-n8-rk3288_defconfig | 3 +-
configs/rock2_defconfig | 5 +-
configs/vyasa-rk3288_defconfig | 5 +-
doc/board/rockchip/rockchip.rst | 8 +-
22 files changed, 22 insertions(+), 2536 deletions(-)
rename arch/arm/dts/{rk3288-evb-u-boot.dtsi => rk3288-evb-rk808-u-boot.dtsi}
(100%)
delete mode 100644 arch/arm/dts/rk3288-evb.dts
delete mode 100644 arch/arm/dts/rk3288-evb.dtsi
delete mode 100644 arch/arm/dts/rk3288-popmetal.dts
delete mode 100644 arch/arm/dts/rk3288-popmetal.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock-pi-n8.dts
delete mode 100644 arch/arm/dts/rk3288-rock2-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-rock2-square.dts
delete mode 100644 arch/arm/dts/rk3288-vmarc-som.dtsi
delete mode 100644 arch/arm/dts/rk3288-vyasa.dts
delete mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
rename configs/{evb-rk3288_defconfig => evb-rk3288-rk808_defconfig} (94%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3695db069323..f6471869516b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -58,13 +58,6 @@ dtb-$(CONFIG_ROCKCHIP_RK3128) += \
dtb-$(CONFIG_ROCKCHIP_RK322X) += \
rk3229-evb.dtb
-dtb-$(CONFIG_ROCKCHIP_RK3288) += \
- rk3288-evb.dtb \
- rk3288-popmetal.dtb \
- rk3288-rock2-square.dtb \
- rk3288-rock-pi-n8.dtb \
- rk3288-vyasa.dtb
-
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
diff --git a/arch/arm/dts/rk3288-evb-u-boot.dtsi
b/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
similarity index 100%
rename from arch/arm/dts/rk3288-evb-u-boot.dtsi
rename to arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
diff --git a/arch/arm/dts/rk3288-evb.dts b/arch/arm/dts/rk3288-evb.dts
deleted file mode 100644
index bb24a96cddf7..000000000000
--- a/arch/arm/dts/rk3288-evb.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
- model = "Evb-RK3288";
- compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-};
-
-&pwm1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
deleted file mode 100644
index 0e347beb154d..000000000000
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ /dev/null
@@ -1,476 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-#include "rk3288.dtsi"
-
-/ {
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- keys: gpio-keys {
- compatible = "gpio-keys";
-
- button@0 {
- gpio-key,wakeup = <1>;
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- label = "GPIO Power";
- linux,code = <116>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_key>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_flash: flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_5v: usb-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_host_5v: usb-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc_host_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_5v>;
- };
-
- vcc_otg_5v: usb-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc_otg_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_5v>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_sys>;
- enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <50>;
- pwms = <&pwm0 0 25000 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- pwm-delay-us = <10000>;
- status = "disabled";
- };
-
- panel: panel {
- compatible = "simple-panel";
- power-supply = <&vcc_io>;
- backlight = <&backlight>;
- enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- broken-cd;
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
- status = "okay";
-};
-
-&gmac {
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- vdd_cpu: syr827@40 {
- compatible = "silergy,syr827";
- fcs,suspend-voltage-selector = <1>;
- reg = <0x40>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- fcs,suspend-voltage-selector = <1>;
- reg = <0x41>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- hym8563: hym8563@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- interrupt-parent = <&gpio7>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&rtc_int>;
- };
-
- act8846: act8846@5a {
- compatible = "active-semi,act8846";
- reg = <0x5a>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_hold>;
- system-power-controller;
-
- regulators {
- vcc_ddr: REG1 {
- regulator-name = "vcc_ddr";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_io: REG2 {
- regulator-name = "vcc_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_log: REG3 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vcc_20: REG4 {
- regulator-name = "vcc_20";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- vccio_sd: REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd10_lcd: REG6 {
- regulator-name = "vdd10_lcd";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcca_codec: REG7 {
- regulator-name = "vcca_codec";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc_tp: REG8 {
- regulator-name = "vcca_33";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vccio_pmu: REG9 {
- regulator-name = "vccio_pmu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vdd_10: REG10 {
- regulator-name = "vdd_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_18: REG11 {
- regulator-name = "vcc_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc18_lcd: REG12 {
- regulator-name = "vcc18_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- act8846 {
- pwr_hold: pwr-hold {
- rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- hym8563 {
- rtc_int: rtc-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- keys {
- pwr_key: pwr-key {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_host {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_18>;
- status = "okay";
-};
-
-&sdio0 {
- broken-cd;
- bus-width = <4>;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
- vmmc-supply = <&vcc_18>;
- status = "disabled";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
- vmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>,
<&spi0_cs1>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&mipi_dsi {
- status = "disabled";
- rockchip,panel = <&panel>;
- display-timings {
- timing0 {
- bits-per-pixel = <24>;
- clock-frequency = <160000000>;
- hfront-porch = <120>;
- hsync-len = <20>;
- hback-porch = <21>;
- hactive = <1200>;
- vfront-porch = <21>;
- vsync-len = <3>;
- vback-porch = <18>;
- vactive = <1920>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
-};
-
-&wdt {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-popmetal.dts b/arch/arm/dts/rk3288-popmetal.dts
deleted file mode 100644
index 736dc51e2615..000000000000
--- a/arch/arm/dts/rk3288-popmetal.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3288-popmetal.dtsi"
-
-/ {
- model = "PopMetal-RK3288";
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-};
-
-&pwm1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-popmetal.dtsi
b/arch/arm/dts/rk3288-popmetal.dtsi
deleted file mode 100644
index ecff641b1099..000000000000
--- a/arch/arm/dts/rk3288-popmetal.dtsi
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
- memory{
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- power {
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- ir: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_int>;
- };
-
- vcc_flash: flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- /*
- * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
- * by the dvp_pwr pin.
- */
- vcc18_dvp: vcc18-dvp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc18-dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc28_dvp>;
- };
-
- vcc28_dvp: vcc28-dvp-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&dvp_pwr>;
- regulator-name = "vcc28_dvp";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc5v0_host: usb-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc_flash>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&gmac {
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_18>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_lan: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_sd: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_lcd: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- ldo5: LDO_REG5 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "ldo5";
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_33: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_33";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_wl: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vccio_wl";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_lcd: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
-
- ak8963: ak8963@0d {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0d>;
- interrupt-parent = <&gpio8>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&comp_int>;
- };
-
- l3g4200d: l3g4200d@68 {
- compatible = "st,l3g4200d-gyro";
- st,drdy-int-pin = <2>;
- reg = <0x6b>;
- };
-
- mma8452: mma8452@1d {
- compatible = "fsl,mma8452";
- reg = <0x1d>;
- interrupt-parent = <&gpio8>;
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&gsensor_int>;
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcca_33>;
- bb-supply = <&vcc_io>;
- dvp-supply = <&vcc18_dvp>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
- gpio30-supply = <&vcc_io>;
- gpio1830-supply = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vccio_wl>;
- status = "okay";
-};
-
-&pinctrl {
- ak8963 {
- comp_int: comp-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- dvp {
- dvp_pwr: dvp-pwr {
- rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- ir {
- ir_int: ir-int {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- mma8452 {
- gsensor_int: gsensor-int {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_host {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&saradc {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>;
- rockchip,hw-tshut-polarity = <0>;
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usb_host1 {
- vbus-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts
b/arch/arm/dts/rk3288-rock-pi-n8.dts
deleted file mode 100644
index c9894a60e703..000000000000
--- a/arch/arm/dts/rk3288-rock-pi-n8.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3288.dtsi"
-#include <rockchip-radxa-dalang-carrier.dtsi>
-#include "rk3288-vmarc-som.dtsi"
-
-/ {
- model = "Radxa ROCK Pi N8";
- compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
- "rockchip,rk3288";
-};
diff --git a/arch/arm/dts/rk3288-rock2-som.dtsi
b/arch/arm/dts/rk3288-rock2-som.dtsi
deleted file mode 100644
index 58e32fbb80f6..000000000000
--- a/arch/arm/dts/rk3288-rock2-som.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3288.dtsi"
-
-/ {
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- pinctrl-0 = <&emmc_reset>;
- pinctrl-names = "default";
- reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- mmc-pwrseq = <&emmc_pwrseq>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vccio_pmu>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins &phy_rst>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
- rx_delay = <0x10>;
- tx_delay = <0x30>;
-};
-
-&i2c0 {
- status = "okay";
-
- act8846: act8846@5a {
- compatible = "active-semi,act8846";
- reg = <0x5a>;
- system-power-controller;
- inl1-supply = <&vcc_io>;
- inl2-supply = <&vcc_sys>;
- inl3-supply = <&vcc_20>;
- vp1-supply = <&vcc_sys>;
- vp2-supply = <&vcc_sys>;
- vp3-supply = <&vcc_sys>;
- vp4-supply = <&vcc_sys>;
-
- regulators {
- vcc_ddr: REG1 {
- regulator-name = "VCC_DDR";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_io: REG2 {
- regulator-name = "VCC_IO";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_log: REG3 {
- regulator-name = "VDD_LOG";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_20: REG4 {
- regulator-name = "VCC_20";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- vccio_sd: REG5 {
- regulator-name = "VCCIO_SD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd10_lcd: REG6 {
- regulator-name = "VDD10_LCD";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcca_codec: REG7 {
- regulator-name = "VCCA_CODEC";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcca_tp: REG8 {
- regulator-name = "VCCA_TP";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccio_pmu: REG9 {
- regulator-name = "VCCIO_PMU";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_10: REG10 {
- regulator-name = "VDD_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- vcc_18: REG11 {
- regulator-name = "VCC_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc18_lcd: REG12 {
- regulator-name = "VCC18_LCD";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
- };
-
- vdd_cpu: syr827@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-enable-ramp-delay = <300>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <8000>;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_gpu: syr828@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-enable-ramp-delay = <300>;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <8000>;
- vin-supply = <&vcc_sys>;
- };
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- emmc {
- emmc_reset: emmc-reset {
- rockchip,pins = <3 9 RK_FUNC_GPIO
&pcfg_pull_none>;
- };
- };
-
- gmac {
- phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-rock2-square.dts
b/arch/arm/dts/rk3288-rock2-square.dts
deleted file mode 100644
index 41676696ba33..000000000000
--- a/arch/arm/dts/rk3288-rock2-square.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3288-rock2-som.dtsi"
-
-/ {
- model = "Radxa Rock 2 Square";
- compatible = "radxa,rock2-square", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- ir: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_int>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "SPDIF";
- simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
- cpu { sound-dai = <&spdif>; };
- codec { sound-dai = <&spdif_out>; };
- };
- };
-
- spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- vcc_usb_host: vcc-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- /* Always on as the rockchip usb phy doesn't have a vbus-supply
- * property
- */
- regulator-always-on;
- regulator-name = "vcc_host";
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- hym8563@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
-
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&pinctrl {
- ir {
- ir_int: ir-int {
- rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&spdif {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- reg-shift = <2>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi
b/arch/arm/dts/rk3288-vmarc-som.dtsi
deleted file mode 100644
index 793951655b73..000000000000
--- a/arch/arm/dts/rk3288-vmarc-som.dtsi
+++ /dev/null
@@ -1,361 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-/ {
- compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
-
- vccio_flash: vccio-flash-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vccio_flash";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vccio_flash>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- phy-supply = <&vcc_io>;
- snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec_c0>;
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1400000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_tp: LDO_REG1 {
- regulator-name = "vcc_tp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_codec: LDO_REG2 {
- regulator-name = "vcca_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_wl: LDO_REG4 {
- regulator-name = "vcc_wl";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-name = "vdd10_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-name = "vcc_18";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-name = "vcc18_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_sd: SWITCH_REG1 {
- regulator-name = "vcc_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_lcd: SWITCH_REG2 {
- regulator-name = "vcc_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- interrupt-parent = <&gpio5>;
- interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&io_domains {
- bb-supply = <&vcc_io>;
- flash0-supply = <&vccio_flash>;
- gpio1830-supply = <&vcc_18>;
- gpio30-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc_wl>;
- status = "okay";
-};
-
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
- <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
- };
- };
-
- vbus_host {
- usb1_en_oc: usb1-en-oc {
- rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- vbus_typec {
- usb0_en_oc: usb0-en-oc {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&sdio_pwrseq {
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vbus_host {
- enable-active-high;
- gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
-};
-
-&vbus_typec {
- enable-active-high;
- gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
-};
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
deleted file mode 100644
index 4193f7208cd0..000000000000
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Jagan Teki <[email protected]>
- */
-
-/dts-v1/;
-#include "rk3288.dtsi"
-
-/ {
- model = "Amarula Vyasa-RK3288";
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- dc12_vbat: dc12-vbat {
- compatible = "regulator-fixed";
- regulator-name = "dc12_vbat";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vboot_3v3: vboot-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vboot_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vboot_5v: vboot-5v {
- compatible = "regulator-fixed";
- regulator-name = "vboot_sv";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- v3g_3v3: v3g-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "v3g_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc12_vbat>;
- };
-
- vsus_5v: vsus-5v {
- compatible = "regulator-fixed";
- regulator-name = "vsus_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc50_hdmi: vcc50-hdmi {
- compatible = "regulator-fixed";
- regulator-name = "vcc50_hdmi";
- enable-active-high;
- gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
- pinctrl-names = "default";
- pinctrl-0 = <&vcc50_hdmi_en>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
- vusb1_5v: vusb1-5v {
- compatible = "regulator-fixed";
- regulator-name = "vusb1_5v";
- enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
-
- vusb2_5v: vusb2-5v {
- compatible = "regulator-fixed";
- regulator-name = "vusb2_5v";
- enable-active-high;
- gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_pwr_en>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsus_5v>;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcca_tp: LDO_REG1 {
- regulator-name = "vcc_tp";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_codec: LDO_REG2 {
- regulator-name = "vcc_codec";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_gps: LDO_REG4 {
- regulator-name = "vcc_gps";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-name = "vdd10_lcd";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-name = "vcc_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-name = "vcc18_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: SWITCH_REG1 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_lan: SWITCH_REG2 {
- regulator-name = "vcc_lan";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- pinctrl-names = "default";
- pinctrl-0 = <&phy_pwr_en>;
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- gmac {
- phy_int: phy-int {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_pmeb: phy-pmeb {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_rst: phy-rst {
- rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO
&pcfg_output_high>;
- };
- };
-
- hdmi {
- vcc50_hdmi_en: vcc50-hdmi-en {
- rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb_host {
- phy_pwr_en: phy-pwr-en {
- rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO
&pcfg_output_high>;
- };
-
- usb2_pwr_en: usb2-pwr-en {
- rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
-
- };
- };
-};
diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
deleted file mode 100644
index da1d548b7330..000000000000
--- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&hym8563>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- };
-
- vcc12v_dcin: vcc12v-dcin-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vbus_host: vbus-host {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_en_oc>;
- regulator-name = "vbus_host"; /* HOST-5V */
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vbus_typec: vbus-typec {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_en_oc>;
- regulator-name = "vbus_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&gmac {
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- disable-wp;
- vqmmc-supply = <&vccio_sd>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
diff --git a/board/amarula/vyasa-rk3288/MAINTAINERS
b/board/amarula/vyasa-rk3288/MAINTAINERS
index 08ea208004a2..d9cf639a31d2 100644
--- a/board/amarula/vyasa-rk3288/MAINTAINERS
+++ b/board/amarula/vyasa-rk3288/MAINTAINERS
@@ -4,5 +4,4 @@ S: Maintained
F: board/amarula/vyasa-rk3288
F: include/configs/vyasa-rk3288.h
F: configs/vyasa-rk3288_defconfig
-F: arch/arm/dts/rk3288-vyasa.dts
F: arch/arm/dts/rk3288-vyasa-u-boot.dtsi
diff --git a/board/chipspark/popmetal_rk3288/MAINTAINERS
b/board/chipspark/popmetal_rk3288/MAINTAINERS
index e12f128dcd70..c81905453f2f 100644
--- a/board/chipspark/popmetal_rk3288/MAINTAINERS
+++ b/board/chipspark/popmetal_rk3288/MAINTAINERS
@@ -1,7 +1,6 @@
POPMETAL-RK3288
M: Lin Huang <[email protected]>
S: Maintained
-F: arch/arm/dts/rk3288-popmetal.dts
F: arch/arm/dts/rk3288-popmetal-u-boot.dtsi
F: board/chipspark/popmetal_rk3288
F: include/configs/popmetal_rk3288.h
diff --git a/board/rockchip/evb_rk3288/MAINTAINERS
b/board/rockchip/evb_rk3288/MAINTAINERS
index 9857ae335754..60f97d7eb3b9 100644
--- a/board/rockchip/evb_rk3288/MAINTAINERS
+++ b/board/rockchip/evb_rk3288/MAINTAINERS
@@ -1,12 +1,10 @@
EVB-RK3288
M: Lin Huang <[email protected]>
S: Maintained
-F: arch/arm/dts/rk3288-evb.dts
-F: arch/arm/dts/rk3288-evb.dtsi
-F: arch/arm/dts/rk3288-evb-u-boot.dtsi
+F: arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
F: board/rockchip/evb_rk3288
F: include/configs/evb_rk3288.h
-F: configs/evb-rk3288_defconfig
+F: configs/evb-rk3288-rk808_defconfig
ROCK-PI-N8
M: Jagan Teki <[email protected]>
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288-rk808_defconfig
similarity index 94%
rename from configs/evb-rk3288_defconfig
rename to configs/evb-rk3288-rk808_defconfig
index 02347b58c229..8e140d6e41cd 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288-rk808_defconfig
@@ -9,7 +9,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-evb-rk808"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -29,7 +29,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-evb-rk808.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_NO_BSS_LIMIT=y
@@ -52,6 +52,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig
index ee9cc2bd8222..461fa5d432a8 100644
--- a/configs/phycore-rk3288_defconfig
+++ b/configs/phycore-rk3288_defconfig
@@ -26,7 +26,7 @@ CONFIG_DEBUG_UART=y
CONFIG_LTO=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-phycore-rdk.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/popmetal-rk3288_defconfig
b/configs/popmetal-rk3288_defconfig
index 95c1097bc93e..4489c0393501 100644
--- a/configs/popmetal-rk3288_defconfig
+++ b/configs/popmetal-rk3288_defconfig
@@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-popmetal"
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
@@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-popmetal.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -47,6 +47,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock-pi-n8-rk3288_defconfig
b/configs/rock-pi-n8-rk3288_defconfig
index 0a88037cefdb..ae2f9e9bb17f 100644
--- a/configs/rock-pi-n8-rk3288_defconfig
+++ b/configs/rock-pi-n8-rk3288_defconfig
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock-pi-n8"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock-pi-n8"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -45,6 +45,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
index 35f449ab567e..dd296efaf1ad 100644
--- a/configs/rock2_defconfig
+++ b/configs/rock2_defconfig
@@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-rock2-square"
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
@@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-rock2-square.dtb"
CONFIG_SILENT_CONSOLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -47,6 +47,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index c9de6f8ad26c..8ac1c9620c65 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -11,7 +11,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-vyasa"
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -26,7 +26,7 @@ CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_USE_PREBOOT=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3288-vyasa.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_NO_BSS_LIMIT=y
@@ -53,6 +53,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 6ae4d4371ff6..08ab2ac69e50 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -40,15 +40,17 @@ List of mainline supported Rockchip boards:
* rk3229
- Rockchip Evb-RK3229 (evb-rk3229)
* rk3288
- - Rockchip Evb-RK3288 (evb-rk3288)
+ - Rockchip Evb-RK3288-rk808 (evb-rk3288-rk808)
- Firefly-RK3288 (firefly-rk3288)
- MQmaker MiQi (miqi-rk3288)
- Phytec RK3288 PCM-947 (phycore-rk3288)
- PopMetal-RK3288 (popmetal-rk3288)
- Radxa Rock 2 Square (rock2)
+ - Radxa Rock Pi N8 (rock-pi-n8-rk3288)
- Tinker-RK3288 (tinker-rk3288)
+ - Tinker-S-RK3288 (tinker-s-rk3288)
- Google Jerry (chromebook_jerry)
- - Google Mickey (chromebook_mickey)
+ - Google Mickey (chromebit_mickey)
- Google Minnie (chromebook_minnie)
- Google Speedy (chromebook_speedy)
- Amarula Vyasa-RK3288 (vyasa-rk3288)
@@ -244,7 +246,7 @@ To build rk3288 boards:
.. code-block:: bash
- make evb-rk3288_defconfig
+ make evb-rk3288-mk808_defconfig
make CROSS_COMPILE=arm-linux-gnueabihf-
To build rk3308 boards:
--
2.39.5
