From: Caleb Ethridge <[email protected]>
Updates the polarities for the GPIOs on the sc594
EZKIT carrier board for the newest revision, Rev D.
The new carrier board revision has different polarities
for some GPIOs. This patch updates the sc594 entries
to match the sc598 entries that were updated in a previous
commit, as both SOMs can utilize the EZKIT.
Note that these updates are for the EZKIT carrier
board used by both sc598 and sc594 SOMs, not the SOMs themselves.
Fixes: be79378 ("board: adi: Add support for SC594")
Signed-off-by: Caleb Ethridge <[email protected]>
---
Changes in v3:
- Resubmission to fix whitespace issues
---
arch/arm/dts/sc594-som-ezkit.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/sc594-som-ezkit.dts b/arch/arm/dts/sc594-som-ezkit.dts
index eeca6d17504..11154e65ed6 100644
--- a/arch/arm/dts/sc594-som-ezkit.dts
+++ b/arch/arm/dts/sc594-som-ezkit.dts
@@ -22,7 +22,7 @@
eeprom {
gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
+ gpios = <0 GPIO_ACTIVE_LOW>;
output-low;
line-name = "eeprom-en";
bootph-pre-ram;
@@ -30,7 +30,7 @@
pushbutton {
gpio-hog;
- gpios = <1 GPIO_ACTIVE_HIGH>;
+ gpios = <1 GPIO_ACTIVE_LOW>;
output-low;
line-name = "pushbutton-en";
bootph-pre-ram;
@@ -70,7 +70,7 @@
octal {
gpio-hog;
- gpios = <8 GPIO_ACTIVE_HIGH>;
+ gpios = <8 GPIO_ACTIVE_LOW>;
output-low;
line-name = "octal-spi-cs-en";
bootph-pre-ram;
--
2.34.1
