Hi Caleb, On Fri, Feb 27, 2026 at 2:34 PM Caleb Ethridge <[email protected]> wrote: > > From: Caleb Ethridge <[email protected]> > > Updates the polarities for the GPIOs on the sc594 > EZKIT carrier board for the newest revision, Rev D. > The new carrier board revision has different polarities > for some GPIOs. This patch updates the sc594 entries > to match the sc598 entries that were updated in a previous > commit, as both SOMs can utilize the EZKIT. > > Note that these updates are for the EZKIT carrier > board used by both sc598 and sc594 SOMs, not the SOMs themselves. > > Fixes: be79378 ("board: adi: Add support for SC594") > Signed-off-by: Caleb Ethridge <[email protected]> > --- > Changes in v3: > - Resubmission to fix whitespace issues > --- > arch/arm/dts/sc594-som-ezkit.dts | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/dts/sc594-som-ezkit.dts > b/arch/arm/dts/sc594-som-ezkit.dts > index eeca6d17504..11154e65ed6 100644 > --- a/arch/arm/dts/sc594-som-ezkit.dts > +++ b/arch/arm/dts/sc594-som-ezkit.dts > @@ -22,7 +22,7 @@ > > eeprom { > gpio-hog; > - gpios = <0 GPIO_ACTIVE_HIGH>; > + gpios = <0 GPIO_ACTIVE_LOW>; > output-low; > line-name = "eeprom-en"; > bootph-pre-ram; > @@ -30,7 +30,7 @@ > > pushbutton { > gpio-hog; > - gpios = <1 GPIO_ACTIVE_HIGH>; > + gpios = <1 GPIO_ACTIVE_LOW>; > output-low; > line-name = "pushbutton-en"; > bootph-pre-ram; > @@ -70,7 +70,7 @@ > > octal { > gpio-hog; > - gpios = <8 GPIO_ACTIVE_HIGH>; > + gpios = <8 GPIO_ACTIVE_LOW>; > output-low; > line-name = "octal-spi-cs-en"; > bootph-pre-ram; > -- > 2.34.1 >
Looks like the reviewed-by tag was dropped on patchwork so here's fresh one: Reviewed-by: Greg Malysa <[email protected]> Thanks, Greg
