Hi Nag,
> Thanks for the comments. It's a very good suggestion to add it as part of
> Command. Unfortunately, I am unable to locate the 'Clock' command source.
> I would greatly appreciate if you can point it for me.
"git grep -A 2 U_BOOT_CMD' is your friend.
Actually as far as I can see, there is no single generic command but
"clockinfo" (e.g. arch/arm/cpu/arm1136/mx35/generic.c) and "clocks"
(e.g. arch/powerpc/cpu/mpc83xx/speed.c).
Maybe we should use this opportunity to align them? So what example
should we follow? Hm, oldest code wins, so here we go:
[dzu@pollux u-boot-testing (master)]$ for f in
arch/arm/cpu/arm1136/mx35/generic.c arch/arm/cpu/armv7/mx5/clock.c
arch/powerpc/cpu/mpc512x/speed.c arch/powerpc/cpu/mpc83xx/speed.c ; do git
describe --contains `git log --follow --pretty=format:%H $f | tail -1` ; done
v2011.03-rc1~2^2~36
v2010.03-rc1~35
v1.3.0-rc4~69^2~1
U-Boot-1_1_3~20^2~7
So PowerPC wins ;) I.e. please use "clocks" as the command name, and
I'd appreciate it if you send a patch changing the mx35 and mx5 code.
Cheers
Detlev
--
Be careful in casting out your devil 'lest you cast out the best thing
about you.
-- Friedrich Nietzsche
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
