Detlev, Thanks for detailed explanation. I will make appropriate patches And send them separately(not as part of ongoing series). Even though I love to make patches for mx35 and mx5 base, I am afraid I may not Able to find time. But, I will do my best.
Thanks again for comments! Nag On Wed, Aug 10, 2011 at 16:17:30, Detlev Zundel wrote: > Hi Nag, > > > Thanks for the comments. It's a very good suggestion to add it as part > > of Command. Unfortunately, I am unable to locate the 'Clock' command source. > > I would greatly appreciate if you can point it for me. > > "git grep -A 2 U_BOOT_CMD' is your friend. > > Actually as far as I can see, there is no single generic command but > "clockinfo" (e.g. arch/arm/cpu/arm1136/mx35/generic.c) and "clocks" > (e.g. arch/powerpc/cpu/mpc83xx/speed.c). > > Maybe we should use this opportunity to align them? So what example should > we follow? Hm, oldest code wins, so here we go: > > [dzu@pollux u-boot-testing (master)]$ for f in > arch/arm/cpu/arm1136/mx35/generic.c arch/arm/cpu/armv7/mx5/clock.c > arch/powerpc/cpu/mpc512x/speed.c arch/powerpc/cpu/mpc83xx/speed.c ; do git > describe --contains `git log --follow --pretty=format:%H $f | tail -1` ; done > v2011.03-rc1~2^2~36 > v2010.03-rc1~35 > v1.3.0-rc4~69^2~1 > U-Boot-1_1_3~20^2~7 > > So PowerPC wins ;) I.e. please use "clocks" as the command name, and I'd > appreciate it if you send a patch changing the mx35 and mx5 code. > > Cheers > Detlev > > -- > Be careful in casting out your devil 'lest you cast out the best thing about > you. > -- Friedrich Nietzsche > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot