On Aug 1, 2011, at 1:23 AM, Kumar Gala wrote: > From: Roy Zang <tie-fei.z...@freescale.com> > > The P1023 has two 1G ethernet controllers the first can run in > SGMII, RGMII, or RMII. The second can only do SGMII & RGMII. > > We need to setup a for SoC & board registers based on our various > configuration for ethernet to function properly on the board. > > Removed CONFIG_SYS_FMAN_FW as its not used anywhere. > > Signed-off-by: Roy Zang <tie-fei.z...@freescale.com> > Signed-off-by: Haiying Wang <haiying.w...@freescale.com> > Signed-off-by: Lei Xu <b33...@freescale.com> > Signed-off-by: Ioana Radulescu <ruxandra.radule...@freescale.com> > Signed-off-by: Shaohui Xie <b21...@freescale.com> > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > arch/powerpc/include/asm/immap_85xx.h | 4 +++ > board/freescale/p1023rds/p1023rds.c | 40 +++++++++++++++++++++++++++++++++ > include/configs/P1023RDS.h | 2 +- > 3 files changed, 45 insertions(+), 1 deletions(-)
applied to 85xx next - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot