Dear Shinya Kuribayashi, In message <4e886d71.3040...@pobox.com> you wrote: > From: Xiangfu Liu <xian...@openmobilefree.net> > Date: Fri, 19 Aug 2011 14:35:29 +0800 > > Jz4740 NAND flash controller can support: > * MLC NAND as well as SLC NAND > * all 8-bit/16-bit NAND flash devices > * HAMMING and RS hardware ECC > * automatic boot up from NAND flash devices > > nand_ecclayout is set up for 2GiB NAND chip mounted in Qi LB60. > We'll bring up boot-from-NAND support in nand_spl/ in the future. > > Signed-off-by: Xiangfu Liu <xian...@openmobilefree.net> > Acked-by: Daniel <z...@ingenic.cn> > Signed-off-by: Shinya Kuribayashi <skuri...@pobox.com> > --- > > Changes since v6: > > * Remove NAND-boot stuff. Those bits will be submitted as a nand-spl > support once this Jz4740 base support is merged. > > * All previous comments from Scott are fixed. > > * Bunch of coding style issues fixed. > > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/jz4740_nand.c | 261 > ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 262 insertions(+), 0 deletions(-) > create mode 100644 drivers/mtd/nand/jz4740_nand.c
Checkpatch says: total: 4 errors, 0 warnings, 268 lines checked Please clean up and resubmit. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If I had to live my life again, I'd make the same mistakes, only sooner. -- Tallulah Bankhead _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot