Hello Scott, Scott Wood wrote: > On 10/06/2011 12:45 AM, Heiko Schocher wrote: >> similiar to commit dc7cd8e59ba077f3b4c1a4557c9cd86a31b9ab1f, only >> adapted for the new spl framework. >> >> Signed-off-by: Heiko Schocher <h...@denx.de> >> Cc: Scott Wood <scottw...@freescale.com> >> Cc: Albert ARIBAUD <albert.u.b...@aribaud.net> >> Cc: Sandeep Paulraj <s-paul...@ti.com> >> >> --- >> changes for v3: >> - add comment from Scott Wood: >> as BSS is cleared, no need for intializing vars with 0 >> remove this. >> >> drivers/mtd/nand/nand_spl_simple.c | 43 >> +++++++++++++++++++++++++++++++++++- >> 1 files changed, 42 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/mtd/nand/nand_spl_simple.c >> b/drivers/mtd/nand/nand_spl_simple.c >> index 71491d4..622a9b5 100644 >> --- a/drivers/mtd/nand/nand_spl_simple.c >> +++ b/drivers/mtd/nand/nand_spl_simple.c >> @@ -140,6 +140,47 @@ static int nand_is_bad_block(int block) >> return 0; >> } >> >> +#if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST) > > Change the name to not be 4BIT-specific, and add documentation for this > config option.
Hmm.. this is no new config option, it enables on davinci socs the 4Bit NAND HW ECC generation ... and I need this in spl code too ... Ok, you are right, there is no documentation of this config option. Should I add this documentation in this patch or in a seperate patch? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot