On 10/12/2011 04:29 PM, Andreas Bießmann wrote: > Dear Sven, > > Am 12.10.2011 15:09, schrieb Sven Schnelle: >> gen_atmel_mci works on AVR32 as well, so no need to use the legacy >> mmc driver. This also has the nice side effect of being able to use >> SDHC cards an AVR32 boards. >> >> Signed-off-by: Sven Schnelle<sv...@stackframe.org> > I have to NACK this patch cause it produces new compile warnings. > > $ PATH=$AVR32_PATH:$PATH BUILD_DIR=/tmp/build_uboot BUILD_NCPU=8 > ./MAKEALL atstk1002 > Configuring for atstk1002 board... > board.c: In function 'board_init_r': > board.c:338: warning: implicit declaration of function 'mmc_initialize' > atstk1000.c: In function 'board_mmc_init': > atstk1000.c:147: warning: implicit declaration of function 'atmel_mci_init' > text data bss dec hex filename > 106091 7504 211676 325271 4f697 /tmp/build_uboot/u-boot
Oops. Should be easily fixable. > --------------------- SUMMARY ---------------------------- > Boards compiled: 1 > Boards with warnings or errors: 1 ( atstk1002 ) > ---------------------------------------------------------- > > And does not work on device: > > a) mmc init is not known? Is this not longer necessar 'mmc init' is only available if CONFIG_GENERIC_MMC isn't set, at least that's how i unterstand the source code. (See common/cmd_mmc.c:29) > b) ext2ls is not reliable: > > ---8<--- > U-Boot> ext2ls mmc 0:1 > <DIR> 1024 . > <DIR> 1024 .. > <DIR> 12288 lost+found > gen_atmel_mci: CMDR 00051051 (17) ARGR 02008600 (SR: 00400025) Data > Transfer Failed > ** ext2fs_devread read error - last part > U-Boot> > --->8--- Hmm, that's really bad. What type of card is this? MMC, SD or SDHC? Regards Sven _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot