On 10/12/2011 04:59 PM, Andreas Bießmann wrote: > Am 12.10.2011 16:51, schrieb Sven Schnelle: >> On 10/12/2011 04:29 PM, Andreas Bießmann wrote: >>> Am 12.10.2011 15:09, schrieb Sven Schnelle: >>> And does not work on device:
>>> b) ext2ls is not reliable: >>> >>> ---8<--- >>> U-Boot> ext2ls mmc 0:1 >>> <DIR> 1024 . >>> <DIR> 1024 .. >>> <DIR> 12288 lost+found >>> gen_atmel_mci: CMDR 00051051 (17) ARGR 02008600 (SR: 00400025) Data >>> Transfer Failed >>> ** ext2fs_devread read error - last part >>> U-Boot> >>> --->8--- >> Hmm, that's really bad. What type of card is this? MMC, SD or SDHC? > > It is SD card (the one delivered with my atstk1002, there is an Atmel > label on it ;). > > When initialising mmc with old atmel_mci driver I get this: > > ---8<--- > U-Boot> mmc init > Manufacturer ID: 03 > OEM/Application ID: 5344 > Product name: SD128 > Product Revision: 5.8 > Product Serial Number: 8227719 > Manufacturing Date: 06/03 > SD Card detected (RCA 58916) > CSD data: 00260032 1f5983c0 fefa4fff 924040ab > CSD structure version: 1.0 > MMC System Spec version: 0 > Card command classes: 1f5 > Read block length: 512 > Supports partial reads > Write block length: 512 > Does not support partial writes > Supports group WP: 32 > Card capacity: 125960192 bytes > File format: 0/0 > Write protection: > mmc: Using 131072 cycles data timeout (DTOR=0x62) > .mmc1 is available > --->8--- > > best regards > > Andreas Bießmann I've just tried all SD cards i have here, which are in particular: Noname 32GB SDHC: works 'PLATINUM' 4GB SDHC: works Sandisk 2GB SD: works Sandisk 2GB Micro SD: works So this seems to be an issue with the specific card - it would be nice if you could enable CONFIG_MMC_TRACE, and send me the output. Regards Sven _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot