Dear Kumar Gala, In message <2a6300e8-a874-49ac-84cb-be681af1b...@freescale.com> you wrote: > > On Aug 26, 2011, at 1:32 PM, York Sun wrote: > > > Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c. > > The unified driver can initialize data using DDR controller. No need to > > use DMA if just to initialze for ECC. > > > > Signed-off-by: York Sun <york...@freescale.com> > > Signed-off-by: Kim Phillips <kim.phill...@freescale.com> > > --- > > board/freescale/mpc8349emds/Makefile | 1 + > > board/freescale/mpc8349emds/ddr.c | 107 > > +++++++++++++++++++++++++++++ > > board/freescale/mpc8349emds/mpc8349emds.c | 26 ++++--- > > include/configs/MPC8349EMDS.h | 16 ++++ > > 4 files changed, 139 insertions(+), 11 deletions(-) > > create mode 100644 board/freescale/mpc8349emds/ddr.c > > applied to 85xx 'next'
Did you test it??? This patch breaks out-of-tree building of the MPC8349EMDS board: + MAKEALL_LOGDIR=/work/wd/tmp-ppc-LOG + BUILD_DIR=/work/wd/tmp-ppc + ./MAKEALL MPC8349EMDS Configuring for MPC8349EMDS board... make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. make[1]: *** No rule to make target `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. make: *** [depend] Error 2 [Local building works.] Note also that "make distclean" still leaves a file arch/powerpc/cpu/mpc83xx/ddr-gen2.c Please fix this, too. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Overflow on /dev/null, please empty the bit bucket. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot