On Oct 23, 2011, at 4:53 AM, Wolfgang Denk wrote: > Dear Kumar Gala, > > In message <2a6300e8-a874-49ac-84cb-be681af1b...@freescale.com> you wrote: >> >> On Aug 26, 2011, at 1:32 PM, York Sun wrote: >> >>> Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c. >>> The unified driver can initialize data using DDR controller. No need to >>> use DMA if just to initialze for ECC. >>> >>> Signed-off-by: York Sun <york...@freescale.com> >>> Signed-off-by: Kim Phillips <kim.phill...@freescale.com> >>> --- >>> board/freescale/mpc8349emds/Makefile | 1 + >>> board/freescale/mpc8349emds/ddr.c | 107 >>> +++++++++++++++++++++++++++++ >>> board/freescale/mpc8349emds/mpc8349emds.c | 26 ++++--- >>> include/configs/MPC8349EMDS.h | 16 ++++ >>> 4 files changed, 139 insertions(+), 11 deletions(-) >>> create mode 100644 board/freescale/mpc8349emds/ddr.c >> >> applied to 85xx 'next' > > Did you test it??? > > > This patch breaks out-of-tree building of the MPC8349EMDS board: > > + MAKEALL_LOGDIR=/work/wd/tmp-ppc-LOG > + BUILD_DIR=/work/wd/tmp-ppc > + ./MAKEALL MPC8349EMDS > Configuring for MPC8349EMDS board... > make[1]: *** No rule to make target > `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by > `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. > make[1]: *** No rule to make target > `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend.ddr-gen2', needed by > `/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/.depend'. Stop. > make: *** [depend] Error 2 > > [Local building works.] > > > Note also that "make distclean" still leaves a file > arch/powerpc/cpu/mpc83xx/ddr-gen2.c > > Please fix this, too. > > Best regards, > > Wolfgang Denk
I'll yell at the guys to fix this :) - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
