Some of the MAS register macros do not protect the parameter with parentheses, which could cause wrong values if the parameter includes operators.
Also fix the definition of TSIZE_TO_BYTES() so that it actually uses the parameter. This hasn't caused any problems to date because the parameter was always been 'tsize'. Signed-off-by: Timur Tabi <ti...@freescale.com> --- arch/powerpc/include/asm/mmu.h | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index ef5076b..209103e 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -392,17 +392,17 @@ extern void print_bats(void); */ #define MAS0_TLBSEL_MSK 0x30000000 -#define MAS0_TLBSEL(x) ((x << 28) & MAS0_TLBSEL_MSK) +#define MAS0_TLBSEL(x) (((x) << 28) & MAS0_TLBSEL_MSK) #define MAS0_ESEL_MSK 0x0FFF0000 -#define MAS0_ESEL(x) ((x << 16) & MAS0_ESEL_MSK) +#define MAS0_ESEL(x) (((x) << 16) & MAS0_ESEL_MSK) #define MAS0_NV(x) ((x) & 0x00000FFF) #define MAS1_VALID 0x80000000 #define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) #define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) -#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10))) +#define MAS1_TSIZE(x) (((x) << 8) & 0x00000F00) +#define TSIZE_TO_BYTES(x) (1ULL << (((x) * 2) + 10)) #define MAS2_EPN 0xFFFFF000 #define MAS2_X0 0x00000040 -- 1.7.3.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
