On 05/12/2011 14:26, Dirk Behme wrote: > On 05.12.2011 14:23, Fabio Estevam wrote: >> On Mon, Dec 5, 2011 at 10:57 AM, Jason Liu <jason....@linaro.org> wrote: >> >>> +IMAGE_VERSION 2 >>> + >>> +# Boot Device : one of >>> +# spi, sd (the board has no nand neither onenand) >>> + >>> +BOOT_FROM sd >> >> This board does not boot from sd, only from SPI NOR. >> >> Could you please let me know how it was tested? >
Hi Dirk, > There is a 'workaround/patch' available from Freescale which switches > the board to SD boot. It's a small program written to the SPI NOR > replacing the U-Boot in SPI NOR, which then itself jumps back to the SD > boot routines. From user point of view the boards boots from SD then. But if I really understand, the board boots always from SPI NOR, in other words the SPI NOR cannot be empty, as it can be if the board boots drirectly from SD. > With a small, invisible indirection via the SPI NOR. Then we need a document / README, as remarked by Fabio, to describe this process. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot