Hi Chander,
Subject line of patch: s/EEYNOS/EXYNOS
On 23 December 2011 11:21, Chander Kashyap <chander.kash...@linaro.org>wrote:
> Dear Minkyu Kang,
>
> On 23 December 2011 09:51, Minkyu Kang <proms...@gmail.com> wrote:
> >
> > Dear Chander Kashyap,
> >
> > On 22 December 2011 19:52, Chander Kashyap <chander.kash...@linaro.org>
> wrote:
> > > SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
> > >
> > > Signed-off-by: Chander Kashyap <chander.kash...@linaro.org>
> > > ---
> > > MAINTAINERS | 1 +
> > > arch/arm/cpu/armv7/exynos/clock.c | 24 +-
> > > arch/arm/include/asm/arch-exynos/clock.h | 232 +--------
> > > arch/arm/include/asm/arch-exynos/clock_exynos4.h | 255 +++++++++
> > > arch/arm/include/asm/arch-exynos/clock_exynos5.h | 352 +++++++++++++
> > > arch/arm/include/asm/arch-exynos/cpu.h | 71 ++--
> > > arch/arm/include/asm/arch-exynos/cpu_exynos4.h | 51 ++
> > > arch/arm/include/asm/arch-exynos/cpu_exynos5.h | 39 ++
> > > arch/arm/include/asm/arch-exynos/gpio.h | 51 ++-
> > > board/samsung/smdk5250/Makefile | 48 ++
> > > board/samsung/smdk5250/lowlevel_init.S | 524
> +++++++++++++++++++
> > > board/samsung/smdk5250/mem_setup.S | 600
> ++++++++++++++++++++++
> > > board/samsung/smdk5250/smdk5250.c | 125 +++++
> > > board/samsung/smdk5250/smdk5250_setup.h | 583
> +++++++++++++++++++++
> > > boards.cfg | 1 +
> > > include/configs/smdk5250.h | 182 +++++++
> > > 16 files changed, 2867 insertions(+), 272 deletions(-)
> > > create mode 100644 arch/arm/include/asm/arch-exynos/clock_exynos4.h
> > > create mode 100644 arch/arm/include/asm/arch-exynos/clock_exynos5.h
> > > create mode 100644 arch/arm/include/asm/arch-exynos/cpu_exynos4.h
> > > create mode 100644 arch/arm/include/asm/arch-exynos/cpu_exynos5.h
> > > create mode 100644 board/samsung/smdk5250/Makefile
> > > create mode 100644 board/samsung/smdk5250/lowlevel_init.S
> > > create mode 100644 board/samsung/smdk5250/mem_setup.S
> > > create mode 100644 board/samsung/smdk5250/smdk5250.c
> > > create mode 100644 board/samsung/smdk5250/smdk5250_setup.h
> > > create mode 100644 include/configs/smdk5250.h
> >
> > Please split this patch for board and SoC.
>
> Ok
> >
> >
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index a56ca10..abf88be 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -704,6 +704,7 @@ Chander Kashyap <k.chan...@samsung.com>
> > >
> > > origen ARM ARMV7 (EXYNOS4210 SoC)
> > > SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
> > > + SMDK5250 ARM ARMV7 (EXYNOS5250 SoC)
> > >
> > > Torsten Koschorrek <koschor...@synertronixx.de>
> > > scb9328 ARM920T (i.MXL)
> > > diff --git a/arch/arm/cpu/armv7/exynos/clock.c
> b/arch/arm/cpu/armv7/exynos/clock.c
> > > index b101f96..88e2fc0 100644
> > > --- a/arch/arm/cpu/armv7/exynos/clock.c
> > > +++ b/arch/arm/cpu/armv7/exynos/clock.c
> > > @@ -125,10 +125,14 @@ static unsigned long exynos_get_pwm_clk(void)
> > >
> > > if (s5p_get_cpu_rev() == 0) {
> > > /*
> > > - * CLK_SRC_PERIL0
> > > + * CLK_SRC_{PERIL0 | PERIC0}
> > > * PWM_SEL [27:24]
> > > */
> > > +#ifdef CONFIG_EXYNOS5
> > > + sel = readl(&clk->src_peric0);
> > > +#else
> > > sel = readl(&clk->src_peril0);
> > > +#endif
> >
> > NAK.
> > We don't allow to using ifdef for separating SoCs.
> > Please refer s5pc1xx case for solve it.
> > This comment apply to this patch globally.
> > Please remove '#ifdef CONFIG_EXYNOS5'.
> >
> I have tried to reuse the code. It is possible to remove
> #ifdef CONFIG_EXYNOS5' in clock.c with cpu_is_s5pcXXX check.
> Is it a acceptable solution? Or is it necessary to write SoC specific
> function
> in clock.c as done in case of s5pc1xx/clock.c.
>
> Please Advice
> >
> > Thanks.
> > Minkyu Kang.
> > --
> > from. prom.
> > www.promsoft.net
>
>
>
>
> --
> with warm regards,
> Chander Kashyap
>
> _______________________________________________
> Samsung mailing list
> sams...@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/samsung
>
--
With warm regards,
Sachin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
