All Tegra2 boards should include tegra2-common. This adds the required USB config to that file.
Signed-off-by: Simon Glass <s...@chromium.org> --- include/configs/tegra2-common.h | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h index e6f385f..6549d00 100644 --- a/include/configs/tegra2-common.h +++ b/include/configs/tegra2-common.h @@ -84,6 +84,20 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} +/* + * USB Host. Tegra2 requires USB buffers to be aligned to a word boundary + */ +#define CONFIG_USB_EHCI_DATA_ALIGN 4 + +/* + * This parameter affects a TXFILLTUNING field that controls how much data is + * sent to the latency fifo before it is sent to the wire. Without this + * parameter, the default (2) causes occasional Data Buffer Errors in OUT + * packets depending on the buffer address and size. + */ +#define CONFIG_USB_EHCI_TXFIFO_THRESH 10 + +#define CONFIG_EHCI_IS_TDI /* include default commands */ #include <config_cmd_default.h> -- 1.7.7.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot