On 1/23/2012 6:18 AM, Stephen Warren wrote:
Olof Johansson wrote at Saturday, January 21, 2012 12:32 AM:
On Thu, Jan 19, 2012 at 9:17 AM, Stephen Warren<swar...@nvidia.com> wrote:
Olof Johansson wrote at Wednesday, January 18, 2012 10:32 PM:
On Wed, Jan 18, 2012 at 05:16:52PM -0700, Stephen Warren wrote:
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+* NVIDIA Tegra20 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,<chip>-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- clock-names : Should contain a list of strings, with values "32k_in",
+ and "osc".
...
+Example:
+
+clocks {
+ clk_32k: oscillator@0 {
If it has a unit addres (@<x>) it needs a reg property with the same base
address.
I thought everything needed a unit address period? Is the rule more like
the unit address is optional, but if present must match reg, so I can
simply remove @0 and @1 here? I guess that makes a lot more sense.
Nope, you only need a unit address to make a node unique, i.e. if you
have more than one with the same name. It's not something that's been
followed very well on ARM dts files, I have even seen review comments
asking for explicit unit IDs when none are needed.
So you can't remove @0 and @1 here, since there are two oscillator subnodes.
If I keep the unit address, then I need to add a reg property per Mitch's
response. But, then I need #address-cells and #size-cells in the clock
node too. Yuck, since this isn't an addressable bus.
Instead, is it acceptable to simply rename the nodes to e.g.:
clk_32k: clock {...};
osc: crystal {...};
One consideration: These nodes are children of a parent, so that parent
is implicitly a "bus node", even though there is no physical hardware
bus. The path resolution rules say that, in the absence of a
"#address-cells" property in a bus node, the default value is 2. So any
code that implements that rule will think these nodes are missing a
"reg" property, thus triggering the "wildcard node" rule, which says
that you can match the node with any unit address.
Whether or not that would cause problems in practice is hard to say. I
think that my Open Firmware implementation would handle it okay, but I
can't speak to the Linux device tree code.
I'm not sure why you thing "yuck" about synthesizing an address space
for the subnodes. It doesn't seem that bad to me.
In the long term, I believe that osc/crystal is going to continue to
be a top-level object, but clk_32k is actually an output from the PMU
chip, and hence there won't be any naming conflict here anyway...
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
