Commit 314284b1567f1ce29c19060641e7f213146f7ab8 has
changed board_mmc_getcd() function prototype, while
mx6qarm2 has still the old one.
Signed-off-by: Stefano Babic <sba...@denx.de>
CC: Jason Liu <jason....@linaro.org>
Acked-by: Dirk Behme <dirk.be...@de.bosch.com>
---
Changes since V1:
- update subject (Fabio Estevam)
Changes since V2:
- board_mmc_getcd() must return 1 in the else clause (Jason Liu)
Note: not tested on real board, the patch fixes building.
board/freescale/mx6qarm2/mx6qarm2.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c
b/board/freescale/mx6qarm2/mx6qarm2.c
index 9894245..1367b88 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -120,17 +120,18 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
{USDHC4_BASE_ADDR, 1},
};
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret;
if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
gpio_direction_input(171); /*GPIO6_11*/
- *cd = gpio_get_value(171);
+ ret = !gpio_get_value(171);
} else /* Don't have the CD GPIO pin on board */
- *cd = 0;
+ ret = 1;
- return 0;
+ return ret;
}
int board_mmc_init(bd_t *bis)
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
