On Wed, Jan 18, 2012 at 5:41 PM, Stefano Babic <sba...@denx.de> wrote: > Commit 314284b1567f1ce29c19060641e7f213146f7ab8 has > changed board_mmc_getcd() function prototype, while > mx6qarm2 has still the old one. > > Signed-off-by: Stefano Babic <sba...@denx.de> > CC: Jason Liu <jason....@linaro.org> > Acked-by: Dirk Behme <dirk.be...@de.bosch.com>
Acked-by: Jason Liu <jason....@linaro.org> > --- > Changes since V1: > - update subject (Fabio Estevam) > > Changes since V2: > - board_mmc_getcd() must return 1 in the else clause (Jason Liu) > > Note: not tested on real board, the patch fixes building. I have tested it on the real board, it works fine:) Tested-by: Jason Liu <jason....@linaro.org> > > board/freescale/mx6qarm2/mx6qarm2.c | 9 +++++---- > 1 files changed, 5 insertions(+), 4 deletions(-) > > diff --git a/board/freescale/mx6qarm2/mx6qarm2.c > b/board/freescale/mx6qarm2/mx6qarm2.c > index 9894245..1367b88 100644 > --- a/board/freescale/mx6qarm2/mx6qarm2.c > +++ b/board/freescale/mx6qarm2/mx6qarm2.c > @@ -120,17 +120,18 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = { > {USDHC4_BASE_ADDR, 1}, > }; > > -int board_mmc_getcd(u8 *cd, struct mmc *mmc) > +int board_mmc_getcd(struct mmc *mmc) > { > struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; > + int ret; > > if (cfg->esdhc_base == USDHC3_BASE_ADDR) { > gpio_direction_input(171); /*GPIO6_11*/ > - *cd = gpio_get_value(171); > + ret = !gpio_get_value(171); > } else /* Don't have the CD GPIO pin on board */ > - *cd = 0; > + ret = 1; > > - return 0; > + return ret; > } > > int board_mmc_init(bd_t *bis) > -- > 1.7.5.4 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot