Hi Fabio, > Very good, Robert! I tested your patch and it fixes the reboot issue > on my mx28evk.
You're most welcome! I'm glad to hear it fixes your problem too. > Also checked in the MX28 Reference Manual about the fact that > hw_clkctrl_frac0 can only be accessed as bytes. It's easy to overlook, I have to admit. > I have some suggestions though: > > 1. Your patch comes as attachment. Please use git send-email instead. I knew I was violating protocol, but I wanted to get it off my chest. I will work on this problem today. I work at two locations, and only at my home office I have an SMTP server I can user. Here at Agilent, unfortunately I only have an MS Exchange server I can use. If I can get that configured at all, there's a good chance it will break my patches. > 2. Please grep the locations where hw_clkctrl_frac0 is assigned as > 32-bit and change those as well. Will do! > 3. Send the two patches in a series via git send-email: 1/2 and 2/2 Will do! I'm reading up on that right now, as Wolfgang suggested earlier. I may as well switch our own internal repository from SVN to GIT, but not today. > Good to know that you fixed the stepping issue as well. Good work! Thanks. I would really like to urge you guys to test the second patch as well. Marek made a remark on that too, so that will be my next mail to answer. Cheers, Robert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot