Hi any updates on this? On Sat, Feb 25, 2012 at 6:44 AM, Graeme Russ <graeme.r...@gmail.com> wrote:
> Hi Asif, > > On 02/24/2012 04:43 PM, Asif Sulikeri wrote: > > Thanks Graeme, > > > > replies in-line, > > Appreciated (after all, that is ML etiquette) > > > > > On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.r...@gmail.com > > <mailto:graeme.r...@gmail.com>> wrote: > > > > Hi Asif, > > > > On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri < > asifiqbal...@gmail.com > > <mailto:asifiqbal...@gmail.com>> wrote: > > > Hi, any updates on this, this is a blocker for me, and waiting for > your > > > suggestions to resolve this issue. > > > > > > > > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri > > <asifiqbal...@gmail.com <mailto:asifiqbal...@gmail.com>>wrote: > > > > > >> Detlev Zundel <dzu <at> denx.de <http://denx.de>> writes: > > >> > > >> Appreciate your reply Detlev, please find my replies in-line, > > >> > > >> > what is the "DM365-IPNC-1.0.14" version about? I cannot see > such a > > >> > version (or tag) in mainline U-Boot. > > >> > > >> I'm sorry for the typo that is supposed to be 1.0.1. > > > > >Don't expect much response if you stay with version 1.0.1 > > > > > > > > I'm sorry for all the confusion, the u-boot version is actually 1.3.4 and > > 1.0.1 is added as a suffix for internal use, sorry for that. Am I still > not > > liable to get help for this version(1.3.4) of u-boot? > > Nope - 1.3.4 is 3.5 years old - more than half of the commits in mainline > have been applied since then. > > > >> > On the other hand, davinci_dm365evm is a supported > configuration in > > >> > mainline, so why not try current code. This way we would be in > a much > > >> > better position to help you. > > >> > > > >> > > >> I'll consider the suggestion, but since I've spent considerable > time on > > >> this, > > >> want to make sure where actually the problem lies. > > > > Have you tried the suggestion of using the current mainline code? > > > > If the problem still exists in latest mainline, you stand a fair > > chance that we'll make an effort to help you out :) > > > > > > :) Thats definitely not the way you bail me out ;), jokes apart, I did > try > > using u-boot-2010.06 but the u-boot binary generated is bulky 252KB, as > > compared the usual 150KB, this leads to another blocker as the UBL(User > > Boot Loader) is now unable to load this bulky u-boot into RAM(or may be > > some other issue), and gets stuck as below: > > Well 2010.06 is also very old - the latest release is 2011.12 > > And the increase of 100kB is massive - are you sure you are compiling with > the same set of options defined in the board config file? If you are sure, > then it would be interesting to find out what has caused it. Could you try > some intermediate releases (2008.10 is the next release after 1.3.4) > > > DM36x initialization passed! > > TI UBL Base Version: 1.50 > > Boot Loader BootMode = NAND > > Starting NAND Copy... > > Valid magicnum, 0xA1ACED66, found in block 0x00000008. > > Boot Mode Task Completed > > > > IPNC UBL Version: 1.1.0 > > Platform: DM365 > > > > Jumping to entry point at 0x81080000 > > > > > > and there's no response whatsoever after this. what might be the issue > now? > > This is outside my knowledge - I've Cc'd the davinci_dm365evm (Sandeep > Paulraj), maybe he can provide some pointers... > > Regards, > > Graeme >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot