Hi, On Feb 27, 2012 4:57 PM, "Asif Sulikeri" <asifiqbal...@gmail.com> wrote: > > Hi any updates on this?
Have you looked into any of my other suggestions? Regards, Graeme > > > On Sat, Feb 25, 2012 at 6:44 AM, Graeme Russ <graeme.r...@gmail.com> wrote: >> >> Hi Asif, >> >> On 02/24/2012 04:43 PM, Asif Sulikeri wrote: >> > Thanks Graeme, >> > >> > replies in-line, >> >> Appreciated (after all, that is ML etiquette) >> >> > >> > On Fri, Feb 24, 2012 at 11:01 AM, Graeme Russ <graeme.r...@gmail.com >> > <mailto:graeme.r...@gmail.com>> wrote: >> > >> > Hi Asif, >> > >> > On Fri, Feb 24, 2012 at 4:25 PM, Asif Sulikeri < asifiqbal...@gmail.com >> > <mailto:asifiqbal...@gmail.com>> wrote: >> > > Hi, any updates on this, this is a blocker for me, and waiting for your >> > > suggestions to resolve this issue. >> > >> > > >> > > On Mon, Feb 20, 2012 at 3:45 PM, Asif Sulikeri >> > <asifiqbal...@gmail.com <mailto:asifiqbal...@gmail.com>>wrote: >> > > >> > >> Detlev Zundel <dzu <at> denx.de <http://denx.de>> writes: >> > >> >> > >> Appreciate your reply Detlev, please find my replies in-line, >> > >> >> > >> > what is the "DM365-IPNC-1.0.14" version about? I cannot see such a >> > >> > version (or tag) in mainline U-Boot. >> > >> >> > >> I'm sorry for the typo that is supposed to be 1.0.1. >> > >> > >Don't expect much response if you stay with version 1.0.1 >> > >> > >> > >> > I'm sorry for all the confusion, the u-boot version is actually 1.3.4 and >> > 1.0.1 is added as a suffix for internal use, sorry for that. Am I still not >> > liable to get help for this version(1.3.4) of u-boot? >> >> Nope - 1.3.4 is 3.5 years old - more than half of the commits in mainline >> have been applied since then. >> >> > >> > On the other hand, davinci_dm365evm is a supported configuration in >> > >> > mainline, so why not try current code. This way we would be in a much >> > >> > better position to help you. >> > >> > >> > >> >> > >> I'll consider the suggestion, but since I've spent considerable time on >> > >> this, >> > >> want to make sure where actually the problem lies. >> > >> > Have you tried the suggestion of using the current mainline code? >> > >> > If the problem still exists in latest mainline, you stand a fair >> > chance that we'll make an effort to help you out :) >> > >> > >> > :) Thats definitely not the way you bail me out ;), jokes apart, I did try >> > using u-boot-2010.06 but the u-boot binary generated is bulky 252KB, as >> > compared the usual 150KB, this leads to another blocker as the UBL(User >> > Boot Loader) is now unable to load this bulky u-boot into RAM(or may be >> > some other issue), and gets stuck as below: >> >> Well 2010.06 is also very old - the latest release is 2011.12 >> >> And the increase of 100kB is massive - are you sure you are compiling with >> the same set of options defined in the board config file? If you are sure, >> then it would be interesting to find out what has caused it. Could you try >> some intermediate releases (2008.10 is the next release after 1.3.4) >> >> > DM36x initialization passed! >> > TI UBL Base Version: 1.50 >> > Boot Loader BootMode = NAND >> > Starting NAND Copy... >> > Valid magicnum, 0xA1ACED66, found in block 0x00000008. >> > Boot Mode Task Completed >> > >> > IPNC UBL Version: 1.1.0 >> > Platform: DM365 >> > >> > Jumping to entry point at 0x81080000 >> > >> > >> > and there's no response whatsoever after this. what might be the issue now? >> >> This is outside my knowledge - I've Cc'd the davinci_dm365evm (Sandeep >> Paulraj), maybe he can provide some pointers... >> >> Regards, >> >> Graeme > >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot