Hi Dirk,
On 04/28/2012 07:51 AM, Dirk Behme wrote:
Hi Eric,
On 26.04.2012 01:50, Eric Nelson wrote:
Signed-off-by: Eric Nelson<eric.nel...@boundarydevices.com>
---
V2 has been stripped of the board-independent changes and
uses clrsetbits_le32() instead of twiddling bits by hand.
V3 returns immediately from setup_sata() if enable_sata_clock()
returns an error.
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 32 +++++++++++++++++++++++++
include/configs/mx6qsabrelite.h | 13 ++++++++++
2 files changed, 45 insertions(+), 0 deletions(-)
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 1d09a72..c9a108f 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -25,6 +25,8 @@
#include<asm/arch/imx-regs.h>
#include<asm/arch/mx6x_pins.h>
#include<asm/arch/iomux-v3.h>
+#include<asm/arch/ccm_regs.h>
Do we need ccm_regs.h here?
Nope. Good catch.
I'll generate a V4 in a day or two to allow some other review.
Stefano, what's the status of the dwc_ahsata driver?
Without that, the bindings are clearly useless.
Regards,
Eric
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
