On 28/04/2012 17:36, Eric Nelson wrote: > Hi Dirk, > > On 04/28/2012 07:51 AM, Dirk Behme wrote: >> Hi Eric, >> >> On 26.04.2012 01:50, Eric Nelson wrote: >>> Signed-off-by: Eric Nelson<eric.nel...@boundarydevices.com> >>> >>> --- >>> V2 has been stripped of the board-independent changes and >>> uses clrsetbits_le32() instead of twiddling bits by hand. >>> >>> V3 returns immediately from setup_sata() if enable_sata_clock() >>> returns an error. >>> >>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 32 >>> +++++++++++++++++++++++++ >>> include/configs/mx6qsabrelite.h | 13 ++++++++++ >>> 2 files changed, 45 insertions(+), 0 deletions(-) >>> >>> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> index 1d09a72..c9a108f 100644 >>> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c >>> @@ -25,6 +25,8 @@ >>> #include<asm/arch/imx-regs.h> >>> #include<asm/arch/mx6x_pins.h> >>> #include<asm/arch/iomux-v3.h> >>> +#include<asm/arch/ccm_regs.h> >> >> Do we need ccm_regs.h here? >> > > Nope. Good catch. > > I'll generate a V4 in a day or two to allow some other review. > > Stefano, what's the status of the dwc_ahsata driver?
Hi Eric, hi Dirk, I have merged the dwc_ahsata into the master branch, and the drive ris available. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot