Marc, > -----Original Message----- > From: Stephen Warren [mailto:swar...@wwwdotorg.org] > Sent: Monday, September 10, 2012 12:08 PM > To: Marc Dietrich > Cc: u-boot@lists.denx.de; Tom Warren > Subject: Re: [PATCH 2/2] tegra: enable lp0 on paz00 > > On 09/10/2012 12:51 PM, Marc Dietrich wrote: > > This enables LP0 to support suspend / resume on PAZ00. > > Ooh. Did you test this out with the AC100 kernel, and have it work? > That'd be pretty cool... > > > diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile > > > -COBJS := $(BOARD).o > > -COBJS += ../../nvidia/common/board.o > > +COBJS-y := $(BOARD).o > > +COBJS-y += ../../nvidia/common/board.o > > +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o > > Hmmm. That's odd. I'd expect that to be part of the core Tegra code, rather > than something boards have to pull in manually.
Stephen's right - this is already done in ../cpu/tegra20-common/Makefile when CONFIG_TEGRA_CLOCK_SCALING is defined. So no need to change the PAZ00 Makefile. > > > diff --git a/include/configs/paz00.h b/include/configs/paz00.h > > > +/* LP0 suspend / resume */ > > +#define CONFIG_TEGRA20_LP0 > > That's been renamed CONFIG_TEGRA_LP0 in u-boot-tegra/next. As part of the pre-work for Tegra30 changes, I've changed generic Tegra defines, labels, etc. to be more non-specific, unless it does really refer to a Tegra20 feature, file, etc. As Stephen says, see u-boot-tegra/next's top commit. Tom -- nvpublic _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
