Dear Łukasz Dałek, > On 20.09.2012 01:43, Marek Vasut wrote: > > h2200 uses companion chip from Samsung. > > OneNAND ? > > > >> When device is powered on > >> chip loads 16kb of flash into internal SRAM and PXA executes it. > >> That program is 1st stage bootloader. > > > > Check OneNAND SPL > > I'm not sure I didn't checked yet. > > >> But u-boot for my device has ~180kb. So it's to big for SRAM. > >> > >>>> And I want to add driver for sdcard and flash and keyboard and lcd > >>>> would be nice... So I will left it as it is for now. > >>> > >>> these drivers are already in uboot > >> > >> I haven't seen any MediaQ 1178 drivers (LCD). > > > > oh it has separate LCD or it uses PXA LCDIF ? > > MQ1178 is a separate SoC. > > >> Also SD card and FLASH controllers are embedded in companion chip. > > > > ASIC3 ? > > Hamcop > > >> Chip is based on S3C440 (or 410?) processor but needs some tweaks and > >> tests. > > > > Uhhh ? > > Hamcop chip looks like s3c2440 processor without ARM core and > with internal data busses limited to 16bytes. Really weird and buggy > thing.
:-( > Łukasz Dałek Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot