Add support for amlogic s4 (S805X2/S905W2/S905Y4) SoCs. These are very similar to other recent SoCs, with the exception of a workaround for some BL2 (mis)behavior.
Signed-off-by: Sean Anderson <[email protected]> --- arch/arm/include/asm/arch-meson/boot0.h | 14 +++++++ arch/arm/mach-meson/Kconfig | 7 ++++ arch/arm/mach-meson/Makefile | 1 + arch/arm/mach-meson/board-s4.c | 50 +++++++++++++++++++++++++ 4 files changed, 72 insertions(+) create mode 100644 arch/arm/include/asm/arch-meson/boot0.h create mode 100644 arch/arm/mach-meson/board-s4.c diff --git a/arch/arm/include/asm/arch-meson/boot0.h b/arch/arm/include/asm/arch-meson/boot0.h new file mode 100644 index 00000000000..7338171be15 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/boot0.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2026 Brivo Systems LLC + */ +b reset +#if IS_ENABLED(CONFIG_MESON_S4) +/* + * BL2 copies some keys to the start of DRAM, clobbering anything in the first + * 2k aside from the initial instruction. I measured the actual data clobbered + * as 1076 bytes, but I suspect the amount depends on the configuration, so + * just go with what amlogic does. + */ +.skip 2048 +#endif diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index c687ef822a2..91d1e8342e0 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -67,6 +67,13 @@ config MESON_A1 help Select this if your SoC is an A113L +config MESON_S4 + bool "S4" + select MESON64_COMMON + select ENABLE_ARM_SOC_BOOT0_HOOK + help + Select this if your SoC is an S905Y4/S905W2/S805X2 + endchoice config SYS_SOC diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile index 08a24d4b24f..2157c35c2d5 100644 --- a/arch/arm/mach-meson/Makefile +++ b/arch/arm/mach-meson/Makefile @@ -17,3 +17,4 @@ endif obj-$(CONFIG_MESON_AXG) += board-axg.o obj-$(CONFIG_MESON_G12A) += board-g12a.o obj-$(CONFIG_MESON_A1) += board-a1.o +obj-$(CONFIG_MESON_S4) += board-s4.o diff --git a/arch/arm/mach-meson/board-s4.c b/arch/arm/mach-meson/board-s4.c new file mode 100644 index 00000000000..7d0bea9924f --- /dev/null +++ b/arch/arm/mach-meson/board-s4.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2023 SberDevices, Inc. + */ + +#include <asm/armv8/mmu.h> +#include <asm/io.h> +#include <linux/compiler.h> +#include <linux/errno.h> + +void meson_init_reserved_memory(__maybe_unused void *fdt) +{ +} + +int meson_get_boot_device(void) +{ + return -ENOSYS; +} + +static struct mm_region s4_mem_map[] = { + { + .virt = 0x00000000UL, + .phys = 0x00000000UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 0x7FE00000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* + * This mem region contains in/out shared memory with bl31, + * hence it's marked as NORMAL memory type + */ + .virt = 0xFFE00000UL, + .phys = 0xFFE00000UL, + .size = 0x00200000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = s4_mem_map; -- 2.53.0
