u-boot  

Messages by Thread

• Re: Re: [PATCH v4 1/2] spi: Introduce initial EEPROM driver mode support João Loureiro
• [PATCH v5 1/3] test: dm: sf: Get the emulator attached to the flash slave João Loureiro
• [PATCH v5 3/3] sandbox: spi: Add SPI EEPROM emulator and DM test João Loureiro
• [PATCH v5 0/3] spi: Introduce driver-model support for SPI EEPROMs João Loureiro
• [PATCH v5 2/3] spi: Introduce initial driver-model support for SPI EEPROMs João Loureiro
• [PATCH v11 00/17] spacemit mmc driver Eric Chung
  • [PATCH v11 02/17] mmc: k1: add sdhci platform driver Eric Chung
  • [PATCH v11 03/17] riscv: dts: spacemit: define a SPI controller node Eric Chung
  • Re: [PATCH v11 03/17] riscv: dts: spacemit: define a SPI controller node Yixun Lan
  • [PATCH v11 06/17] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure Eric Chung
  • [PATCH v11 07/17] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom Eric Chung
  • [PATCH v11 10/17] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports Eric Chung
  • [PATCH v11 04/17] riscv: dts: spacemit: k1: add SD card controller and pinctrl support Eric Chung
  • [PATCH v11 12/17] riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes Eric Chung
  • [PATCH v11 11/17] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate Eric Chung
  • [PATCH v11 08/17] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR Eric Chung
  • [PATCH v11 09/17] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports Eric Chung
  • [PATCH v11 14/17] configs: k1: enable SD and eMMC support Eric Chung
  • [PATCH v11 17/17] spacemit: k1: fix product name detection and DTB matching in SPL Eric Chung
  • [PATCH v11 13/17] dts: k1: enable mmc devices in SPL Eric Chung
  • [PATCH v11 15/17] MAINTAINER: update Spacemit K1 entry Eric Chung
  • [PATCH v11 01/17] spacemit: k1: select boot device via config registers Eric Chung
  • [PATCH v11 16/17] doc: spacemit: flash on K1 SoC based boards Eric Chung
• [PATCH] board: tqma6ul: Add missing include Tom Rini
  • Re: [PATCH] board: tqma6ul: Add missing include Tom Rini
• [PATCH] MAINTAINERS: Include riscv_timer.c in RISC-V entry Yao Zi
  • Re: [PATCH] MAINTAINERS: Include riscv_timer.c in RISC-V entry Tom Rini
• [PATCH 0/4] Apple NVMe fixes for macOS 15+ firmware / M4 support Janne Grunau
  • [PATCH 3/4] nvme: apple: Add WARN_ON_ONCE for non page-aligned admin queue buffers Janne Grunau
  • [PATCH 4/4] nvme: apple: Drop the PRP null check chicken bit Janne Grunau
  • [PATCH 1/4] nvme: apple: Don't set a DMA direction for commands without a data transfer Janne Grunau
  • [PATCH 2/4] nvme: apple: Never set the opcode in the NVMMU TCB Janne Grunau
• [PATCH] usb: gadget: dwc2_udc_otg: translate DMA addresses via dev_phys_to_bus() Levi Tomes
• [PATCH] power: regulator: require SCMI firmware for SCMI regulators Pengpeng Hou
• [RFC PATCH] vpl: make I2C and PCH options effective Pengpeng Hou
• [PATCH] board: tqma7: imply the DP83867 PHY symbol Pengpeng Hou
• [PATCH] riscv: mpfs: imply the CoreQSPI driver Pengpeng Hou
• [PATCH] fastboot: fix the RK3328 buffer-address default Pengpeng Hou
• [PATCH] efi_loader: imply the FS_FAT Kconfig symbol Pengpeng Hou
• [PATCH] arm: am33xx: Default to enabling LTO Tom Rini
• [PATCH v2 0/4] sdm845: Configure USB3/DP combo properly David Heidelberg via B4 Relay
  • [PATCH v2 1/4] phy: qcom: qmp-combo: select PCS register offsets per version David Heidelberg via B4 Relay
  • [PATCH v2 3/4] power: regulator: qcom-rpmh: add PM8998 support David Heidelberg via B4 Relay
  • [PATCH v2 2/4] phy: qcom: qmp-combo: add SDM845 support David Heidelberg via B4 Relay
  • [PATCH v2 4/4] configs: qcom: enable QMP USB3-DP combo PHY David Heidelberg via B4 Relay
• [GIT PULL] amd/xilinx/fpga patches for v2026.10-rc3 Michal Simek
  • Re: [GIT PULL] amd/xilinx/fpga patches for v2026.10-rc3 Tom Rini
• [PATCH] efi_loader: remove unused function efi_dp_match() Vincent Stehlé
• [PATCH 0/5] efi: ECPT EBBR conformance profiles Vincent Stehlé
  • [PATCH 3/5] lib: uuid: add EBBR 2.2-2.4 conformance profile GUIDs Vincent Stehlé
  • [PATCH 1/5] efi_loader: adjust EBBR 2.1 ECPT entry Vincent Stehlé
  • [PATCH 5/5] doc: uefi: EBBR conformance profiles Vincent Stehlé
  • [PATCH 4/5] test/py: add 2.2-2.4 ECPT tests Vincent Stehlé
  • [PATCH 2/5] efi_loader: add EBBR 2.2-2.4 ECPT entries Vincent Stehlé
• [PATCH] riscv: timer: Fix M-Mode timer Nikita Shubin
  • Re: [PATCH] riscv: timer: Fix M-Mode timer Yao Zi
• [PATCH 0/6] power: domain: mtk: add support for MT8189 David Lechner
  • [PATCH 1/6] power: domain: mtk: simplify Kconfig David Lechner
  • [PATCH 3/6] power: domain: mtk: support two-phase bus protection David Lechner
  • [PATCH 5/6] arm: dts: mediatek: mt8189: add the power controller David Lechner
  • [PATCH 2/6] configs: mediatek: drop no longer needed POWER_DOMAIN options David Lechner
  • [PATCH 4/6] power: domain: mtk: add MT8189 power domain David Lechner
  • [PATCH 6/6] configs: mt8189: enable the power domain driver David Lechner
• [PATCH v5 00/13] mediatek: add HDMI pipeline support for MT8188 based boards Julien Stephan
  • [PATCH v5 05/13] video: mediatek: add merge component Julien Stephan
  • [PATCH v5 03/13] video: mediatek: add display pipeline component helpers Julien Stephan
  • [PATCH v5 06/13] video: mediatek: add mutex component Julien Stephan
  • [PATCH v5 08/13] video: mediatek: add rdma component Julien Stephan
  • [PATCH v5 10/13] asm-generic: unaligned: add get_unaligned_le24() Julien Stephan
  • Re: [PATCH v5 10/13] asm-generic: unaligned: add get_unaligned_le24() Ilias Apalodimas
  • [PATCH v5 12/13] arm: dts: mt8390: add framebuffer reserved-memory Julien Stephan
  • [PATCH v5 09/13] video: mediatek: add dpi1 component Julien Stephan
  • [PATCH v5 13/13] configs: mediatek: mt8188: enable hdmi pipeline Julien Stephan
  • [PATCH v5 11/13] video: mediatek: add hdmi driver Julien Stephan
  • [PATCH v5 07/13] video: mediatek: add padding component Julien Stephan
  • [PATCH v5 04/13] video: mediatek: add ethdr component Julien Stephan
  • [PATCH v5 01/13] memory: sort the Makefile alphabetically Julien Stephan
  • [PATCH v5 02/13] memory: mediatek: add SMI larb driver Julien Stephan
• [PATCH] watchdog: Add support for i6300esb Jan Kiszka
• [PATCH v2 0/2] Watchdog support for qemu arm and riscv Jan Kiszka
  • [PATCH v2 1/2] watchdog: Add support for i6300esb Jan Kiszka
  • [PATCH v2 2/2] board: qemu: arm/riscv: Probe watchdogs late Jan Kiszka
• [PATCH 0/7] Enable PCI functionality on AM654 at U-Boot proper Siddharth Vadapalli
  • [PATCH 4/7] board: ti: am65x: evm: add support for SPL to update U-Boot device-tree Siddharth Vadapalli
  • [PATCH 6/7] arm: dts: k3-am654: add bootph-all to gpio@38 for daughtercard detection Siddharth Vadapalli
  • [PATCH 5/7] arm: dts: k3-am65x-binman: package overlay for PCI-USB2 daughtercard Siddharth Vadapalli
  • [PATCH 2/7] pci: pcie_dw_ti: fetch num-lanes from the device-tree and use it Siddharth Vadapalli
  • [PATCH 1/7] phy: ti: phy-ti-am654: fix logic for programming clock parent Siddharth Vadapalli
  • [PATCH 7/7] configs: am65x_evm_a53_defconfig: enable support for PCI-USB2 daughtercard Siddharth Vadapalli
  • [PATCH 3/7] pci: pcie_dw_ti: fetch reset-gpios from the device-tree and use it Siddharth Vadapalli
• [PATCH 0/3] configs: STM32MP2: Update config for STM32 SoCs Patrice Chotard
  • [PATCH 3/3] configs: stm32mp23: Sync config with STM32MP25 one Patrice Chotard
  • [PATCH 1/3] configs: stm32mp25: Enable CMD_BDINFO_EXTRA flag Patrice Chotard
  • [PATCH 2/3] configs: stm32mp21: Enable CMD_BDINFO_EXTRA flag Patrice Chotard
• [PATCH 0/2] STM32MP2: Restore boot for MP23/MP25 DK boards Patrice Chotard
  • [PATCH 1/2] ARM: dts: Add bootph-all in ltdc node for stm32mp257f-dk-u-boot Patrice Chotard
  • [PATCH 2/2] ARM: dts: Add bootph-all in ltdc node for sqtm32mp235f-dk-u-boot Patrice Chotard
• [PATCH v10 00/15] add software ecdsa support Philippe Reynes
  • [PATCH v10 09/15] tools: fit_image_setup_sig: set required_keynode to -1 Philippe Reynes
  • [PATCH v10 13/15] tools: preload_check_sign: add support of ecdsa Philippe Reynes
  • [PATCH v10 10/15] tools: mkimage: pre-load: add support of ecdsa Philippe Reynes
  • [PATCH v10 14/15] test: py: vboot: prepare test for global signature with ecdsa Philippe Reynes
  • [PATCH v10 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented Philippe Reynes
  • [PATCH v10 05/15] drivers: crypto: add software ecdsa support Philippe Reynes
  • [PATCH v10 02/15] mbedtls: enable support of ecc Philippe Reynes
  • [PATCH v10 12/15] boot: pre-load: add support of ecdsa Philippe Reynes
  • [PATCH v10 15/15] test: py: vboot: add test for global signature with ecdsa Philippe Reynes
  • [PATCH v10 11/15] tools: binman: pre-load: add support of ecdsa Philippe Reynes
  • [PATCH v10 04/15] test: lib: ecdsa: add initial test Philippe Reynes
  • [PATCH v10 01/15] ecdsa: fix support of secp521r1 Philippe Reynes
  • [PATCH v10 08/15] test: vboot: add test for ecdsa Philippe Reynes
  • [PATCH v10 03/15] ecdsa: initial support of ecdsa using mbedtls Philippe Reynes
  • [PATCH v10 07/15] test: py: vboot: prepare integration test for ecdsa Philippe Reynes
• [PATCH] arch/riscv: Allow booting from NET Nikita Shubin
• [PATCH 00/10] spl: ufs: Add support for loading U-Boot from boot W-LU Alexey Charkov
  • [PATCH 04/10] scsi: allow a controller to declare well known logical units Alexey Charkov
  • Re: [PATCH 04/10] scsi: allow a controller to declare well known logical units Neil Armstrong
  • Re: [PATCH 04/10] scsi: allow a controller to declare well known logical units Alexey Charkov
  • [PATCH 01/10] ufs: hand sense data to the SCSI layer Alexey Charkov
  • Re: [PATCH 01/10] ufs: hand sense data to the SCSI layer Neil Armstrong
  • Re: [PATCH 01/10] ufs: hand sense data to the SCSI layer Alexey Charkov
  • [PATCH 02/10] scsi: repeat an INQUIRY that a unit attention interrupted Alexey Charkov
  • [PATCH 05/10] scsi: add a lookup by target and LUN Alexey Charkov
  • [PATCH 10/10] spl: ufs: allow loading U-Boot from the boot logical unit Alexey Charkov
  • [PATCH 09/10] ufs: expose the boot logical unit as a block device Alexey Charkov
  • [PATCH 07/10] ufs: define the well known logical unit ids Alexey Charkov
  • [PATCH 08/10] ufs: report the logical unit the boot W-LU presents Alexey Charkov
  • Re: [PATCH 00/10] spl: ufs: Add support for loading U-Boot from boot W-LU Neil Armstrong
  • [PATCH 03/10] scsi: size a well known unit from the unit it stands in for Alexey Charkov
  • [PATCH 06/10] part: name the well known logical unit device type Alexey Charkov
• [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup() Nikita Shubin
  • Re: [PATCH] riscv: Fix IPI not initialized in riscv_cpu_setup() Michal Simek
• [PATCH v3 0/2] usb: gadget: add SuperSpeed descriptor support Thinh Nguyen
  • [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support Thinh Nguyen
  • Re: [PATCH v3 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support Marek Vasut
  • [PATCH v3 2/2] usb: gadget: dfu: add SuperSpeed descriptor support Thinh Nguyen
• [PATCH v2 0/4] cmd: optee_rpmb: make it usable by scripts Rasmus Villemoes
  • [PATCH v2 1/4] cmd: optee_rpmb: sanitize TEE_ERROR -> E* translations Rasmus Villemoes
  • [PATCH v2 2/4] optee_ta_avb.h: add TA_AVB_CMD_READ_PERSIST_VALUE2 define Rasmus Villemoes
  • [PATCH v2 4/4] cmd: optee_rpmb: make it usable by scripts Rasmus Villemoes
  • [PATCH v2 3/4] cmd: optee_rpmb: allocate large enough buffer when reading persistent value Rasmus Villemoes
• Re: [PATCH 3/3] pinctrl: pinctrl_stm32: support IO synchronization parameters Mateusz Nowicki
  • Re: [PATCH 3/3] pinctrl: pinctrl_stm32: support IO synchronization parameters Patrice CHOTARD
• [PATCH 00/14] tree-wide: check dev_remap_addr() for NULL David Lechner
  • [PATCH 01/14] power: pmic: mtk-pwrap: check dev_remap_addr() for NULL David Lechner
  • [PATCH 04/14] net: hifemac: check dev_remap_addr_name() for NULL David Lechner
  • [PATCH 02/14] net: mt7628-eth: check dev_remap_addr_index() for NULL David Lechner
  • [PATCH 03/14] net: airoha_eth: check dev_remap_addr_name() for NULL David Lechner
  • [PATCH 05/14] net: hifemac_mdio: check dev_remap_addr() for NULL David Lechner
  • [PATCH 06/14] usb: dwc3-octeon-glue: check dev_remap_addr() for NULL David Lechner
  • Re: [PATCH 06/14] usb: dwc3-octeon-glue: check dev_remap_addr() for NULL Mattijs Korpershoek
  • [PATCH 07/14] usb: dwc3-am62: check dev_remap_addr_index() for NULL David Lechner
  • Re: [PATCH 07/14] usb: dwc3-am62: check dev_remap_addr_index() for NULL Mattijs Korpershoek
  • [PATCH 08/14] timer: mchp-pit64b: check dev_read_addr_ptr() for NULL David Lechner
  • [PATCH 11/14] pinctrl: aspeed: ast2600: check dev_read_addr_ptr() for NULL David Lechner
  • [PATCH 09/14] phy: qcom: snps-femto-v2: check dev_read_addr_ptr() for NULL David Lechner
  • [PATCH 12/14] reset: ast2500: check dev_read_addr_ptr() for NULL David Lechner
  • [PATCH 14/14] arm: aspeed: ast2600: check devfdt_get_addr_ptr() for NULL David Lechner
  • [PATCH 10/14] phy: rockchip: inno-dsidphy: check dev_read_addr_ptr() for NULL David Lechner
  • [PATCH 13/14] reset: ast2600: check dev_read_addr_ptr() for NULL David Lechner
• [PATCH v2] net: sandbox: support raw Ethernet with lwIP James Hilliard
• [PATCH v2 0/2] video: fix build with VIDEO && !VIDEO_LOGO Julien Stephan
  • [PATCH v2 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO Julien Stephan
  • Re: [PATCH v2 2/2] video: fix build with CONFIG_VIDEO && !CONFIG_VIDEO_LOGO Tom Rini
  • [PATCH v2 1/2] video: remove show_splash() Julien Stephan
  • Re: [PATCH v2 1/2] video: remove show_splash() Tom Rini
• [PATCH 0/4] arm: dts: am43xx: Switch to OF_UPSTREAM Markus Schneider-Pargmann (TI)
  • [PATCH 3/4] configs: am43xx: Switch to upstream devicetree Markus Schneider-Pargmann (TI)
  • [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files Markus Schneider-Pargmann (TI)
  • Re: [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files Tom Rini
  • Re: [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files Markus Schneider-Pargmann
  • Re: [PATCH 1/4] arm: dts: am43xx: Add missing board u-boot.dtsi files Tom Rini
  • [PATCH 2/4] arm: dts: am4372-u-boot.dtsi: Add tick-timer Markus Schneider-Pargmann (TI)
• [PATCH v3 0/5] firmware-owned devicetree for EBBR / SystemReady DeviceTree Carlo Caione
  • [PATCH v3 1/5] efi_loader: bootmgr: preserve a passed devicetree Carlo Caione
  • [PATCH v3 5/5] test: boot: add firmware-FDT source tests Carlo Caione
  • [PATCH v3 3/5] bootmeth: efi: use the firmware-owned devicetree Carlo Caione
  • [PATCH v3 4/5] efi_loader: bootmgr: install the firmware-owned devicetree Carlo Caione
  • [PATCH v3 2/5] boot: add a firmware-owned devicetree source Carlo Caione
• [PATCH v4 0/3] A-core no-SPL Boot Support Gokul Praveen
  • [PATCH v4 3/3] doc: ti: document A Core no-SPL boot mode for J784S4 EVM Gokul Praveen
  • [PATCH v4 1/3] configs: add A-core no-SPL mode fragment for k3 devices Gokul Praveen
  • [PATCH v4 2/3] arm: k3-binman: add tinospl.bin for direct U-Boot boot Gokul Praveen
• Re: [PATCH v2 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support Thinh Nguyen
  • Re: [PATCH v2 1/2] usb: gadget: mass_storage: add SuperSpeed descriptor support Mattijs Korpershoek
• [PATCH v2] fw_env: use env-size property for nvmem layout device detection Michael C. Pratt
  • Re: [PATCH v2] fw_env: use env-size property for nvmem layout device detection Tom Rini
• [PATCH] fix 32bit silent truncation of 64bit offset in mmc_get_env_addr() Torsten Rupp via B4 Relay
  • Re: [PATCH] fix 32bit silent truncation of 64bit offset in mmc_get_env_addr() Peng Fan
• Re: [PATCH v6 0/5] binman: add PKCS#11/HSM signing support for X509 certificates Sergio Prado
• [PATCH] mach-snapdragon: skip serial# env set if already present Balaji Selvanathan
  • Re: [PATCH] mach-snapdragon: skip serial# env set if already present Casey Connolly
• [PATCH] configs: qcom_qcs8300: store environment on UFS Balaji Selvanathan
• [PATCH] usb: gadget: f_mass_storage: Synchronously tear interface down Marek Vasut
• [PATCH] imx: imx8mm_evk: Indent the config with tabs Marek Vasut
• [PATCH v4 0/4] fit: Harden handling of external-data properties Anton Ivanov
  • [PATCH v4 1/4] image-fit: Use unsigned types for external data properties Anton Ivanov
  • [PATCH v4 3/4] spl: fit: Harden external-data offset and size arithmetic Anton Ivanov
  • [PATCH v4 4/4] spl: fit: Bound external data like U-Boot proper Anton Ivanov
  • [PATCH v4 2/4] test: spl: Factor out external-data FIT property checks Anton Ivanov

• Earlier messages