These boards are typically fitted with an Intel PCIe network card.
Since commit cd9b71c3f629 ("layerscape: Disable CONFIG_FMAN_ENET on
*aqds* platforms") which disabled on-chip DPAA networking, we can now
set CONFIG_DM_ETH for the Intel driver.
We also need to enable PCI bus enumeration during init, to actually make
use of the DM_ETH driver.
Signed-off-by: Vladimir Oltean <[email protected]>
---
configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 2 ++
configs/ls1043aqds_tfa_defconfig | 2 ++
configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 2 ++
configs/ls1046aqds_tfa_defconfig | 2 ++
4 files changed, 8 insertions(+)
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 7e8d98c78404..8e10b218fe50 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -11,11 +11,13 @@ CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
+CONFIG_DM_ETH=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
CONFIG_SF_DEFAULT_BUS=1
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_PCI=y
+CONFIG_PCI_INIT_R=y
CONFIG_NXP_ESBC=y
CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index e8fc4c9c1b57..236281892fa6 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -13,12 +13,14 @@ CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
+CONFIG_DM_ETH=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
CONFIG_SF_DEFAULT_BUS=1
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_ENV_ADDR=0x60500000
CONFIG_PCI=y
+CONFIG_PCI_INIT_R=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index 43699af49a1b..733bde1c3fd5 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -11,11 +11,13 @@ CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
+CONFIG_DM_ETH=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
CONFIG_SF_DEFAULT_BUS=1
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_PCI=y
+CONFIG_PCI_INIT_R=y
CONFIG_NXP_ESBC=y
CONFIG_SYS_FSL_SEC_MON_BE=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 31668b74af8e..ab1fdbd2b6a8 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -13,12 +13,14 @@ CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_SYS_I2C_MXC_I2C4=y
CONFIG_DM_GPIO=y
+CONFIG_DM_ETH=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
CONFIG_SF_DEFAULT_BUS=1
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
CONFIG_ENV_ADDR=0x60500000
CONFIG_PCI=y
+CONFIG_PCI_INIT_R=y
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
--
2.34.1
