The ethsw command controls Ethernet switch drivers through the switch API and does not use the network protocol stack. Its Kconfig entry is inside the NET_LEGACY block, preventing the command from being enabled with lwIP.
Move CMD_ETHSW outside the legacy-only block. Signed-off-by: James Hilliard <[email protected]> --- cmd/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/cmd/Kconfig b/cmd/Kconfig index ff90a87024c..2867e65f605 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -2195,14 +2195,6 @@ config IPV6_ROUTER_DISCOVERY Will automatically perform router solicitation on first IPv6 network operation -config CMD_ETHSW - bool "ethsw" - help - Allow control of L2 Ethernet switch commands. These are supported - by the vsc9953 Ethernet driver at present. Sub-commands allow - operations such as enabling / disabling a port and - viewing/maintaining the filtering database (FDB) - config CMD_WOL bool "wol" help @@ -2223,6 +2215,14 @@ config CMD_DNS help Lookup the IP of a hostname +config CMD_ETHSW + bool "ethsw" + help + Allow control of L2 Ethernet switch commands. These are supported + by the vsc9953 Ethernet driver at present. Sub-commands allow + operations such as enabling / disabling a port and + viewing/maintaining the filtering database (FDB) + config CMD_MII bool "mii" imply CMD_MDIO --- base-commit: 964ad5b5c91b7be56e443e899d7f873e6aa8c9fc change-id: 20260825-submit-lwip-ethsw-v1-b79022823e94 Best regards, -- James Hilliard <[email protected]>
