Add the EcoNet EN7528 board: board glue, the reference/RAM/tclinux and JCOW414 R3-hook defconfigs, board header and default environment.
Signed-off-by: AK Sharma <[email protected]> --- board/econet/en7528/MAINTAINERS | 13 +++ board/econet/en7528/Makefile | 2 + board/econet/en7528/board.c | 110 +++++++++++++++++++++++ board/econet/en7528/mk_tclinux_uboot.py | 112 ++++++++++++++++++++++++ board/econet/en7528/tclinux_stub.S | 65 ++++++++++++++ configs/en7528_jcow414_r3hook_defconfig | 76 ++++++++++++++++ configs/en7528_ram_defconfig | 62 +++++++++++++ configs/en7528_reference_defconfig | 40 +++++++++ defenvs/en7528_jcow414_r3hook_env | 5 ++ include/configs/en7528.h | 9 ++ 10 files changed, 494 insertions(+) create mode 100644 board/econet/en7528/MAINTAINERS create mode 100644 board/econet/en7528/Makefile create mode 100644 board/econet/en7528/board.c create mode 100644 board/econet/en7528/mk_tclinux_uboot.py create mode 100644 board/econet/en7528/tclinux_stub.S create mode 100644 configs/en7528_jcow414_r3hook_defconfig create mode 100644 configs/en7528_ram_defconfig create mode 100644 configs/en7528_reference_defconfig create mode 100644 defenvs/en7528_jcow414_r3hook_env create mode 100644 include/configs/en7528.h diff --git a/board/econet/en7528/MAINTAINERS b/board/econet/en7528/MAINTAINERS new file mode 100644 index 00000000..69cefe4a --- /dev/null +++ b/board/econet/en7528/MAINTAINERS @@ -0,0 +1,13 @@ +ECONET/AIROHA EN75XX +M: AK Sharma <[email protected]> +S: Maintained +F: arch/mips/mach-en75xx/ +F: arch/mips/dts/econet,en7528* +F: board/econet/en7528/ +F: configs/en7528_*_defconfig +F: defenvs/en7528_jcow414_r3hook_env +F: doc/board/econet/en7528.rst +F: doc/board/econet/index.rst +F: drivers/mtd/nand/spi/en75_bmt.* +F: drivers/serial/serial_en75xx.c +F: include/configs/en7528.h diff --git a/board/econet/en7528/Makefile b/board/econet/en7528/Makefile new file mode 100644 index 00000000..bcca1a9f --- /dev/null +++ b/board/econet/en7528/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0+ +obj-y += board.o diff --git a/board/econet/en7528/board.c b/board/econet/en7528/board.c new file mode 100644 index 00000000..5708781e --- /dev/null +++ b/board/econet/en7528/board.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <dm.h> +#include <init.h> +#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <stdio.h> + +#if CONFIG_IS_ENABLED(AIROHA_ETH) +extern U_BOOT_DRIVER(airoha_eth); +#endif + +#if defined(CONFIG_USB_XHCI_MTK) +/* + * Release the USB host + T-PHY reset domains. The SCU reset controller is not + * modelled as a DM reset provider in this port (the ethernet driver pokes it + * directly too), so pulse the reset bits by hand. Banks/bits verified against + * the kernel clk-en7523 en751221 reset table: USB_HOST_P0 = RST_CTRL1(0x834) + * bit22; USB_PHY_P0/P1 = RST_USB(0x0ec) bits 6/7. set = assert/hold in reset, + * clear = release. + */ +#define EN7528_SCU_RST_CTRL1 0xbfb00834 +#define EN7528_SCU_RST_USB 0xbfb000ec +#define EN7528_RST_USB_HOST_P0 BIT(22) /* in RST_CTRL1 */ +#define EN7528_RST_USB_PHY_P0 BIT(6) /* in RST_USB */ +#define EN7528_RST_USB_PHY_P1 BIT(7) /* in RST_USB */ + +/* + * USB2 T-PHY port enable. The nop-phy placeholder does nothing, so bring the + * two USB2 PHY ports up by hand the way the kernel en7528 USB PHY driver's + * .init does: write ACR3_ENABLE to each U2 port block. PHY MMIO base + * 0x1fa80000; U2 port bases 0x300 / 0x1300; ACR3 at +0x1c. + */ +#define EN7528_USB_PHY_BASE 0xbfa80000 +#define EN7528_USB_PHY_U2_P0 0x300 +#define EN7528_USB_PHY_U2_P1 0x1300 +#define EN7528_USB_PHY_ACR3 0x1c +#define EN7528_USB_PHY_ACR3_ENABLE 0xc0240000 + +#define SCU_R(off) __raw_readl((void __iomem *)(0xbfb00000 + (off))) +#define SCU_W(off, v) __raw_writel((v), (void __iomem *)(0xbfb00000 + (off))) + +static void en7528_usb_init(void) +{ + u32 v; + + /* + * SoC-level USB clock/PLL + XSI mux + reset, reverse-engineered from the + * stock JCOW407 vendor kernel (MU3H driver, routine at 0x56f170). This is + * what the mainline OpenWrt kernel relies on the bootloader to have done, + * and which the bootbase does NOT do in our ramboot path — so the xHCI MAC + * (0x1fb90000) comes up unclocked without it. + */ + v = SCU_R(0x90); /* USB clock/PLL enable: bits[30:29]=11 */ + SCU_W(0x90, (v & 0x9fffffff) | 0x60000000); + mdelay(10); /* PLL settle */ + v = SCU_R(0xa8); SCU_W(0xa8, v | 0x600); + v = SCU_R(0xac); SCU_W(0xac, v & ~0x30000000); + v = SCU_R(0xa8); SCU_W(0xa8, v | 0x6000); + v = SCU_R(0xa8); SCU_W(0xa8, v & ~0x1800); + v = SCU_R(0xac); SCU_W(0xac, v & ~0x08000000); + v = SCU_R(0xec); SCU_W(0xec, v & ~0x80000000); /* RST_USB assert */ + mdelay(1); + v = SCU_R(0xec); SCU_W(0xec, v | 0x80000000); /* RST_USB deassert */ + mdelay(6); + + /* legacy per-domain reset release (harmless, kept) */ + v = SCU_R(0x834); SCU_W(0x834, v & ~EN7528_RST_USB_HOST_P0); + v = SCU_R(0xec); SCU_W(0xec, v & ~(EN7528_RST_USB_PHY_P0 | EN7528_RST_USB_PHY_P1)); + mdelay(1); + + /* enable both USB2 T-PHY ports (kernel en7528 phy .init) */ + __raw_writel(EN7528_USB_PHY_ACR3_ENABLE, + (void __iomem *)(EN7528_USB_PHY_BASE + + EN7528_USB_PHY_U2_P0 + EN7528_USB_PHY_ACR3)); + __raw_writel(EN7528_USB_PHY_ACR3_ENABLE, + (void __iomem *)(EN7528_USB_PHY_BASE + + EN7528_USB_PHY_U2_P1 + EN7528_USB_PHY_ACR3)); + mdelay(1); +} +#endif + +int board_init(void) +{ + return 0; +} + +int board_late_init(void) +{ +#if defined(CONFIG_USB_XHCI_MTK) + en7528_usb_init(); +#endif +#if CONFIG_IS_ENABLED(AIROHA_ETH) + struct udevice *dev; + int ret; + + /* + * Probe the EN751221-family Ethernet parent after the console is up and + * just before initr_net() enumerates UCLASS_ETH devices (mirrors the + * EN7512 reference board). + */ + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(airoha_eth), &dev); + if (ret && ret != -ENODEV) + printf("EN7528 Ethernet probe failed: %d\n", ret); +#endif + return 0; +} diff --git a/board/econet/en7528/mk_tclinux_uboot.py b/board/econet/en7528/mk_tclinux_uboot.py new file mode 100644 index 00000000..d63f46a3 --- /dev/null +++ b/board/econet/en7528/mk_tclinux_uboot.py @@ -0,0 +1,112 @@ +#!/usr/bin/env python3 +""" +Package U-Boot as an EcoNet/TrendChip "tclinux" HDR2 image, so the stock +bootbase will load and run it exactly the way it loads the stock kernel. + +The bootbase decompresses a slot's LZMA payload to a fixed 0x80002000 and jumps +there. U-Boot cannot be linked at that address (MIPS relocation needs the +relocation delta 64 KiB aligned, and reserve_uboot() force-aligns relocaddr to +64 KiB, so a TEXT_BASE of 0x80002000 always panics "Mis-aligned relocation"). +So the payload is a small relocator stub followed by a U-Boot linked at +0x81000000; the stub copies it up and jumps. + + payload = [stub @0x80002000][pad to 0x100][u-boot.bin linked @0x81000000] + image = [HDR2 header 0x100][LZMA(payload)] + +Header layout, confirmed against the stock image on a live board +(0x100 + kernel_len + rootfs_len == total, exactly): + + 0x00 "HDR2" + 0x08 u32 LE total size, including the 0x100 header + 0x0c u32 LE JAMCRC of everything after the header + 0x10 version string + 0x50 u32 LE kernel length + 0x54 u32 LE rootfs length + 0x100 LZMA kernel, then the rootfs + +Usage: mk_tclinux_uboot.py <stub.bin> <u-boot.bin> <out.trx> [version] +""" +import struct +import subprocess +import sys +import tempfile +import zlib + +PAYLOAD_OFF = 0x100 +HDR_SIZE = 0x100 +DEFAULT_VERSION = 'UBOOT_EN7528' + + +def lzma_alone(data): + """LZMA 'alone' stream, the format the bootbase decompressor expects. + + xz streams and therefore stamps the uncompressed-size field as unknown; the + vendor encoder records the real size and some decoders rely on it, so the + field is filled in afterwards. Both are valid LZMA-alone. + """ + out = subprocess.run( + ['xz', '--format=lzma', '--stdout', '-9', '--lzma1=preset=9,lc=1,lp=2,pb=2'], + input=data, check=True, capture_output=True).stdout + + # xz streams, so it stamps the size field "unknown" (all 0xff). The vendor + # encoder (lzma_alone) records the real size and some decoders rely on it, + # so fill it in. Header is props(1) + dictsize(4) + uncompressed size(8). + out = bytearray(out) + struct.pack_into('<Q', out, 5, len(data)) + return bytes(out) + + +def main(): + if len(sys.argv) < 4: + sys.exit(__doc__) + + stub = open(sys.argv[1], 'rb').read() + uboot = open(sys.argv[2], 'rb').read() + outpath = sys.argv[3] + version = sys.argv[4] if len(sys.argv) > 4 else DEFAULT_VERSION + + if len(stub) > PAYLOAD_OFF: + sys.exit('stub is %d bytes, must fit in %#x' % (len(stub), PAYLOAD_OFF)) + + payload = stub + b'\x00' * (PAYLOAD_OFF - len(stub)) + uboot + comp = lzma_alone(payload) + + kernel_len = len(comp) + rootfs_len = 0 + total = HDR_SIZE + kernel_len + rootfs_len + + hdr = bytearray(b'\xff' * HDR_SIZE) + hdr[0x00:0x04] = b'HDR2' + hdr[0x04:0x08] = bytes([0x00, 0x01, 0x00, 0x00]) # as seen in stock images + struct.pack_into('<I', hdr, 0x08, total) + # 0x0c filled in below + ver = version.encode()[:0x1f] + b'\n' + hdr[0x10:0x10 + len(ver)] = ver + hdr[0x10 + len(ver):0x30] = b'\x00' * (0x30 - 0x10 - len(ver)) + hdr[0x30] = 0x0a # as seen in stock images + hdr[0x31:0x50] = b'\x00' * (0x50 - 0x31) + struct.pack_into('<I', hdr, 0x50, kernel_len) + struct.pack_into('<I', hdr, 0x54, rootfs_len) + hdr[0x58:0x100] = b'\x00' * (0x100 - 0x58) + + body = comp + jamcrc = (zlib.crc32(body) ^ 0xFFFFFFFF) & 0xFFFFFFFF + struct.pack_into('<I', hdr, 0x0c, jamcrc) + + image = bytes(hdr) + body + open(outpath, 'wb').write(image) + + print('stub : %d B' % len(stub)) + print('u-boot : %d B (linked 0x81000000)' % len(uboot)) + print('payload : %d B (entry 0x80002000)' % len(payload)) + print('lzma : %d B' % kernel_len) + print('version : %s' % version) + print('JAMCRC : 0x%08x' % jamcrc) + print('total : %d B (0x%x) [header 0x100 + kernel + rootfs]' % (total, total)) + print('image : %s %d B' % (outpath, len(image))) + assert len(image) == total, (len(image), total) + print('consistency : 0x100 + %d + %d == %d OK' % (kernel_len, rootfs_len, total)) + + +if __name__ == '__main__': + main() diff --git a/board/econet/en7528/tclinux_stub.S b/board/econet/en7528/tclinux_stub.S new file mode 100644 index 00000000..4bd032d4 --- /dev/null +++ b/board/econet/en7528/tclinux_stub.S @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Relocator stub for booting U-Boot as an EcoNet "tclinux" image. + * + * The vendor bootbase decompresses a firmware image to a fixed 0x80002000 and + * jumps there. U-Boot cannot be linked at that address: MIPS relocation + * requires (relocaddr - TEXT_BASE) to be 64 KiB aligned, and reserve_uboot() + * force-aligns relocaddr to 64 KiB, so a TEXT_BASE of 0x80002000 always + * panics with "Mis-aligned relocation". + * + * So this stub takes the entry instead: it copies the U-Boot image that + * follows it up to a 64 KiB aligned address and jumps there. + * + * The source is read through the cached KSEG0 alias, because the loader wrote + * it that way and the bytes may still only exist in cache. The destination is + * written through the uncached KSEG1 alias so it is guaranteed to reach DRAM + * without depending on this SoC's unreliable cache maintenance (see + * airoha_eth / en75_bmt), and nothing has cached that region before. + * + * Layout of the payload this stub heads: + * +0x0000 this stub + * +0x0100 u-boot.bin, linked at 0x81000000 + */ + +#define STUB_ENTRY 0x80002000 +#define PAYLOAD_OFF 0x100 +#define DEST 0x81000000 +/* Fixed generous span; U-Boot is ~0.5 MiB and trailing junk is harmless. */ +#define COPY_LEN 0x00100000 + + .set noreorder + .set noat + .globl _start + .text +_start: + /* + * t0 = CACHED source = KSEG0(STUB_ENTRY + PAYLOAD_OFF). + * Whoever loaded us (the bootbase decompressor, or tftpboot when + * testing) wrote this image through the cache, so it must be read back + * the same way - reading the uncached alias returns stale DRAM. + */ + lui $t0, 0x8000 + ori $t0, $t0, (PAYLOAD_OFF + 0x2000) + + /* t1 = uncached destination = KSEG1(DEST) */ + lui $t1, 0xa100 + + /* t2 = byte count */ + lui $t2, (COPY_LEN >> 16) + ori $t2, $t2, (COPY_LEN & 0xffff) + +1: + lw $t3, 0($t0) + sw $t3, 0($t1) + addiu $t0, $t0, 4 + addiu $t1, $t1, 4 + addiu $t2, $t2, -4 + bgtz $t2, 1b + nop + + /* Enter U-Boot at its link address (cached KSEG0). */ + lui $t9, (DEST >> 16) + ori $t9, $t9, (DEST & 0xffff) + jr $t9 + nop diff --git a/configs/en7528_jcow414_r3hook_defconfig b/configs/en7528_jcow414_r3hook_defconfig new file mode 100644 index 00000000..f847dc42 --- /dev/null +++ b/configs/en7528_jcow414_r3hook_defconfig @@ -0,0 +1,76 @@ +CONFIG_MIPS=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_MALLOC_LEN=0x400000 +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0xc0000 +CONFIG_ENV_OFFSET_REDUND=0xe0000 +CONFIG_DEFAULT_DEVICE_TREE="econet,en7528-ram" +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_ARCH_EN75XX=y +CONFIG_BUILD_TARGET="u-boot.bin" +CONFIG_BOARD_EN7528_R3HOOK=y +CONFIG_TEXT_BASE=0x81E00000 +CONFIG_SYS_MIPS_TIMER_FREQ=200000000 +# CONFIG_MIPS_CACHE_SETUP is not set +# CONFIG_MIPS_CACHE_DISABLE is not set +# CONFIG_RESTORE_EXCEPTION_VECTOR_BASE is not set +CONFIG_MIPS_BOOT_FDT=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_BOOTM_LEN=0x2000000 +CONFIG_BOOTDELAY=2 +CONFIG_DISPLAY_CPUINFO=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="EN7528> " +CONFIG_SYS_MAXARGS=16 +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_BOOTM=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MTD=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_ENV_IS_NOWHERE is not set +CONFIG_ENV_IS_IN_MTD=y +CONFIG_ENV_MTD_DEV="spi-nand0" +CONFIG_ENV_REDUNDANT=y +CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y +CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/en7528_jcow414_r3hook_env" +CONFIG_BOARD_LATE_INIT=y +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_CMD_NET=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_MII=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MDIO=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y +CONFIG_CLK=y +CONFIG_DMA=y +CONFIG_AIROHA_ETH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_CMD_USB=y +CONFIG_BLK=y +CONFIG_PARTITIONS=y +CONFIG_DOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_FS_FAT=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_AIROHA_SNFI_SPI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y +CONFIG_CMD_DM=y +CONFIG_MTD_EN75_BMT=y +CONFIG_LZMA=y diff --git a/configs/en7528_ram_defconfig b/configs/en7528_ram_defconfig new file mode 100644 index 00000000..55ec279c --- /dev/null +++ b/configs/en7528_ram_defconfig @@ -0,0 +1,62 @@ +CONFIG_MIPS=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_MALLOC_LEN=0x100000 +CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x1000 +CONFIG_DEFAULT_DEVICE_TREE="econet,en7528-ram" +CONFIG_SYS_LOAD_ADDR=0x81800000 +CONFIG_ARCH_EN75XX=y +CONFIG_BUILD_TARGET="u-boot.bin" +CONFIG_BOARD_EN7528_RAM=y +CONFIG_SYS_MIPS_TIMER_FREQ=200000000 +# CONFIG_MIPS_CACHE_SETUP is not set +# CONFIG_MIPS_CACHE_DISABLE is not set +# CONFIG_RESTORE_EXCEPTION_VECTOR_BASE is not set +CONFIG_BOOTDELAY=3 +CONFIG_DISPLAY_CPUINFO=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="EN7528> " +CONFIG_SYS_MAXARGS=16 +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_ENV_IS_NOWHERE=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_CMD_NET=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_MII=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MDIO=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y +CONFIG_CLK=y +CONFIG_DMA=y +CONFIG_AIROHA_ETH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_CMD_USB=y +CONFIG_BLK=y +CONFIG_PARTITIONS=y +CONFIG_DOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_FS_FAT=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_AIROHA_SNFI_SPI=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y +CONFIG_CMD_MTD=y +CONFIG_CMD_DM=y +CONFIG_MTD_EN75_BMT=y +CONFIG_LZMA=y diff --git a/configs/en7528_reference_defconfig b/configs/en7528_reference_defconfig new file mode 100644 index 00000000..6811c7e3 --- /dev/null +++ b/configs/en7528_reference_defconfig @@ -0,0 +1,40 @@ +CONFIG_MIPS=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_MALLOC_LEN=0x100000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x1000 +CONFIG_DEFAULT_DEVICE_TREE="econet,en7528-reference" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000 +CONFIG_SPL_SERIAL=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x1000 +CONFIG_SPL_BSS_START_ADDR=0x80080000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 +CONFIG_SYS_LOAD_ADDR=0x81800000 +CONFIG_SPL=y +CONFIG_ARCH_EN75XX=y +CONFIG_BUILD_TARGET="u-boot.bin" +CONFIG_BOARD_EN7528_REFERENCE=y +CONFIG_SYS_MIPS_TIMER_FREQ=150000000 +CONFIG_MIPS_CACHE_SETUP=y +CONFIG_MIPS_CACHE_DISABLE=y +CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y +CONFIG_MIPS_BOOT_FDT=y +CONFIG_FIT=y +CONFIG_BOOTDELAY=3 +CONFIG_DISPLAY_CPUINFO=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_TPL=y +# CONFIG_TPL_FRAMEWORK is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="EN7528> " +CONFIG_SYS_MAXARGS=8 +CONFIG_CMD_MEMINFO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_ENV_IS_NOWHERE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_SPL_DM=y diff --git a/defenvs/en7528_jcow414_r3hook_env b/defenvs/en7528_jcow414_r3hook_env new file mode 100644 index 00000000..4bc9e278 --- /dev/null +++ b/defenvs/en7528_jcow414_r3hook_env @@ -0,0 +1,5 @@ +ipaddr=192.168.1.111 +serverip=192.168.1.166 +loadaddr=0x82000000 +bootdelay=2 +bootcmd=mtd read spi-nand0 ${loadaddr} 0x100000 0x1000000; bootm ${loadaddr} diff --git a/include/configs/en7528.h b/include/configs/en7528.h new file mode 100644 index 00000000..b8dc2410 --- /dev/null +++ b/include/configs/en7528.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __CONFIG_EN7528_H +#define __CONFIG_EN7528_H + +#define CFG_SYS_SDRAM_BASE 0x80000000 +/* Above FIT scratch (0x82000000) and kernel load (0x80020000, up to ~32 MiB). */ +#define CFG_SYS_INIT_SP_OFFSET 0x04000000 + +#endif -- 2.53.0
