On 8/17/26 19:15, Sean Anderson wrote:
This adds basic support for the Khadas VIM1S [1]. I built this config on
a custom board, and I don't even own a vim1s. Please test!
[1] https://www.khadas.com/vim1s
Signed-off-by: Sean Anderson <[email protected]>
---
board/amlogic/q200/MAINTAINERS | 1 +
configs/khadas-vim1s_defconfig | 80 ++++++++++++++++++++++++++++++++++
2 files changed, 81 insertions(+)
create mode 100644 configs/khadas-vim1s_defconfig
diff --git a/board/amlogic/q200/MAINTAINERS b/board/amlogic/q200/MAINTAINERS
index aece8d5e05c..5281e06f3cc 100644
--- a/board/amlogic/q200/MAINTAINERS
+++ b/board/amlogic/q200/MAINTAINERS
@@ -5,6 +5,7 @@ L: [email protected]
F: board/amlogic/q200/
F: include/configs/q200.h
F: configs/beelink-gt1-ultimate_defconfig
+F: configs/khadas-vim1s_defconfig
F: configs/khadas-vim2_defconfig
F: configs/libretech-s905d-pc_defconfig
F: configs/libretech-s912-pc_defconfig
diff --git a/configs/khadas-vim1s_defconfig b/configs/khadas-vim1s_defconfig
new file mode 100644
index 00000000000..143425cd2ca
--- /dev/null
+++ b/configs/khadas-vim1s_defconfig
@@ -0,0 +1,80 @@
+CONFIG_ARM=y
+CONFIG_SYS_BOARD="q200"
+CONFIG_ARCH_MESON=y
+CONFIG_TEXT_BASE=0x0
+CONFIG_SYS_MALLOC_LEN=0x8000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00200000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-s4-s905y4-khadas-vim1s"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
+CONFIG_MESON_S4=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_IDENT_STRING=" vim1s"
+# CONFIG_PSCI_RESET is not set
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+# CONFIG_BOOTSTD is not set
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_SUPPORT_RAW_INITRD=y
+# CONFIG_DISTRO_DEFAULTS is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/mmcblk1p2 ro rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="load mmc 1:1 $loadaddr linux.itb && bootm"
Why not leave the default boot command ?
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
+# CONFIG_CMD_BDI is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_WDT=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+# CONFIG_CMD_DATE is not set
+CONFIG_CMD_RTC=y
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_MESON=y
+# CONFIG_INPUT is not set
+CONFIG_MMC_MESON_GX=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_MDIO_MUX=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_ETH_DESIGNWARE_MESON8B=y
+CONFIG_MDIO_MUX_MESON_G12A=y
+CONFIG_PHY_MESON_GXL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MESON_S4=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1337=y
+CONFIG_RTC_DS1337_NOOSC=y
+CONFIG_BAUDRATE=888888
+CONFIG_MESON_SERIAL=y
+CONFIG_WDT=y
+CONFIG_WDT_MESON_GXBB=y
+# CONFIG_TOOLS_MKEFICAPSULE is not set
