On September  2, 2026 thus sayeth Gokul Praveen:
> Hi Bryan,
> 
> On 01/09/26 21:53, Bryan Brattlof wrote:
> > On August 19, 2026 thus sayeth Gokul Praveen:
> > > A-Core no-SPL Mode is a boot approach that bypasses
> > > the A Core SPL while retaining U-Boot in the boot flow.
> > > This mode provides faster boot times compared to normal boot
> > > while maintaining U-Boot's flexibility for kernel loading
> > > and system configuration..
> > > 
> > > v3<==> v2
> > > ===========
> > > * Updated the naming convention used from "no-spl" to "A-core no-spl" to
> > > * make it more specific and clear..
> > > * Link to 
> > > v2:https://lore.kernel.org/all/[email protected]/
> > > 
> > > v2<==> v1
> > > ===========
> > > * Updated the naming convention used from "semi-falcon" to "no-spl".
> > > * Link to v1: 
> > > https://lore.kernel.org/all/[email protected]/
> > > 
> > > Boot logs link :
> > > https://gist.github.com/GokulPraveen2001/fef407a482e2dad30272006de557627c
> > > 
> > > Gokul Praveen (3):
> > >    configs: add A-core no-SPL mode fragment for k3 devices
> > >    arm: k3-binman: add tinospl.bin for direct U-Boot boot
> > >    doc: ti: document A Core no-SPL boot mode for J784S4 EVM
> > > 
> > >   Makefile                               |   2 +-
> > >   arch/arm/dts/k3-binman.dtsi            |  47 ++++++++
> > >   arch/arm/dts/k3-j784s4-binman.dtsi     |  65 +++++++++++
> > >   arch/arm/dts/k3-j784s4-evm-u-boot.dtsi |  14 +++
> > >   configs/k3_a72_nospl.config            |   1 +
> > >   configs/k3_r5_nospl.config             |   1 +
> > Please make sure to update the board/ti/*/MAINTAINERS entries for these
> > config fragments.
> 
> Got it, do you recommend creating a separate MAINTAINERS folder
> 
> in the board/ti folder and adding my name under some TI BOOTFLOWS heading
> with subheading as
> 
> A-Core no-SPL mode or do you instead  recommend adding TI BOOTFLOWS heading
> with subheading as
> 
> A-Core no-SPL mode inside all the board/ti/*/MAINTAINERS files.

As long as one board has it covered we should be good. Because this 
looks to only be for the J784S4-EVM I would suggest adding them to the 
EVM block inside board/ti/j784s4/MAINTAINERS

~Bryan

Reply via email to