On 14/08/2026 07:15, Aswin Murugan wrote:
> Enable the QMP USB3 PHY driver in the Qualcomm common defconfig.
>
> This allows USB3 PHY initialization support when the corresponding
> platform DT is enabled.
>
> Signed-off-by: Aswin Murugan <[email protected]>
> ---
> configs/qcom_defconfig | 1 +
> drivers/phy/qcom/phy-qcom-qmp-usb3-legacy.c | 2 +-
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
> index 295ead46a44..6edbfb8be63 100644
> --- a/configs/qcom_defconfig
> +++ b/configs/qcom_defconfig
> @@ -118,6 +118,7 @@ CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_PHY=y
> CONFIG_PHY_QCOM_QMP_UFS=y
> CONFIG_PHY_QCOM_QUSB2=y
> +CONFIG_PHY_QCOM_QMP_USB3_LEGACY=y
> CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
> CONFIG_PHY_QCOM_SNPS_EUSB2=y
> CONFIG_PINCTRL=y
> diff --git a/drivers/phy/qcom/phy-qcom-qmp-usb3-legacy.c
> b/drivers/phy/qcom/phy-qcom-qmp-usb3-legacy.c
> index d1aad6e7952..0113e28553b 100644
> --- a/drivers/phy/qcom/phy-qcom-qmp-usb3-legacy.c
> +++ b/drivers/phy/qcom/phy-qcom-qmp-usb3-legacy.c
> @@ -311,7 +311,7 @@ static int qmp_usb3_legacy_power_on(struct phy *phy)
>
> status = qmp->pcs + QPHY_V3_PCS_PCS_STATUS;
> ret = readl_poll_timeout(status, val, !(val & PHYSTATUS),
> - PHY_INIT_COMPLETE_TIMEOUT);
> + PHY_INIT_COMPLETE_TIMEOUT);
> if (ret) {
> dev_err(qmp->dev, "phy initialization timed-out\n");
> clk_disable(&qmp->pipe_clk);
please drop this hunk in v4
--
// Casey (she/her)
