Hi Tom, Please pull fsl-qoriq-for-2027-01-rc2
I dropped the PPC changes which needs more time for response, only kept the change that Bradley as PPC maintainer. --------------------------------------------------- Add Bradley as PPC maintainer Make BASE_DISCOVER_AGENT it optional following spec Various update for lx2160a serdes from Vincent Check LSB_FIRST for fsl_espi --------------------------------------------------- CI: https://git.u-boot-project.org/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/1748 Thanks Peng The following changes since commit dfcfc4c9f78d1743f490a497082a4ec8e058aae8: Prepare v2027.01-rc1 (2026-10-26 18:21:37 -0600) are available in the Git repository at: https://git.u-boot-project.org/u-boot/custodians/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-2027-01-rc2 for you to fetch changes up to 03dba82b4a4f79c9da908ff15fee97d682354f8b: MAINTAINERS: powerpc: Add me as PowerPC maintainer (2026-10-27 08:44:03 +0800) ---------------------------------------------------------------- Bradley Morgan (1): MAINTAINERS: powerpc: Add me as PowerPC maintainer Bryan Brattlof (1): firmware: scmi: check if BASE_DISCOVER_AGENT is implemented Tomas Alvarez Vanoli (1): spi: fsl_espi: check user's LSB_FIRST Vincent Jardin (18): power: regulator: pmbus: check the device in the exported helpers power: regulator: pmbus: read back the VOUT_COMMAND setpoint test: dm: pmbus: test pmbus_regulator_read_vout_command() board: nbxv3: VID handoff writes table value, no droop compensation armv8: fsl-layerscape: icid: also find DWC3 nodes as fsl, ls1028a-dwc3 board: lx2160a: serdes: drop the split subcommand board: lx2160a: serdes: rename serdes1:split to serdes1:100g4x25g board: lx2160a: serdes: rename SPLIT_POLL_US to SRDS_POLL_US board: lx2160a: serdes: move the SD1 halt and reset into helpers board: lx2160a: serdes: set SD1 with a table board: lx2160a: serdes: report unknown SD1 cases board: lx2160a: serdes: no SD1 config once MC runs board: lx2160a: serdes: add serdes1:2x40g board: lx2160a: serdes: enter a SD1 mode through the mode it starts from board: lx2160a: serdes: add serdes1:40g4x10g board: lx2160a: serdes: add serdes1:100g4x10g doc: lx2160a: document the sd1 hwconfig option board: nbxv3: apply sd1 hwconfig before MC starts MAINTAINERS | 3 +- arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 7 + arch/arm/cpu/armv8/fsl-layerscape/icid.c | 18 +- board/nxp/lx2160a/eth_lx2160aqds.c | 4 +- board/nxp/lx2160a/nbxv3/eth_nbxv3.c | 3 + board/nxp/lx2160a/nbxv3/vid_handoff.c | 77 ++-- board/nxp/lx2160a/serdes_split.c | 532 +++++++++++++++++++---- board/nxp/lx2160a/serdes_split.h | 16 +- doc/README.fsl-hwconfig | 70 +++ drivers/firmware/scmi/base.c | 5 + drivers/power/regulator/pmbus_helper.c | 64 ++- drivers/spi/fsl_espi.c | 7 +- include/pmbus.h | 14 + test/dm/pmbus.c | 41 ++ 14 files changed, 684 insertions(+), 177 deletions(-)
