> The Genio 510 and 700 EVKs use the same USB host controller, PHY, PMIC > and onboard hub. Enable the required drivers in their shared MT8188 > configuration fragment so both boards can use the USB-C PD host port. > > Enable the MediaTek xHCI/MTU3 host and T-PHY drivers together with the > PMIC, regulator and onboard-hub support. Enable the USB command and > mass-storage driver to discover and read removable media using the > existing USB stack. > > Signed-off-by: Carlo Caione <[email protected]> > > diff --git a/configs/mt8188.config b/configs/mt8188.config > index cd5e68dbca3..26c1a972d27 100644 > --- a/configs/mt8188.config > +++ b/configs/mt8188.config > @@ -13,16 +13,31 @@ CONFIG_BOOTSTD_FULL=y > CONFIG_CMD_CLK=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > +CONFIG_CMD_USB=y > CONFIG_OF_UPSTREAM=y > CONFIG_CLK=y > +CONFIG_DM_GPIO=y > CONFIG_DM_I2C=y > CONFIG_MMC_MTK=y > CONFIG_PHY=y > +CONFIG_PHY_MTK_TPHY=y > CONFIG_PINCTRL=y > CONFIG_POWER_DOMAIN=y > +CONFIG_DM_PMIC=y > +CONFIG_DM_PMIC_MTK_PWRAP=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_REGULATOR_MT6359=y > CONFIG_BAUDRATE=921600 > CONFIG_DM_SERIAL=y > CONFIG_MTK_SERIAL=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_MTK=y > +CONFIG_USB_MTU3=y > +CONFIG_USB_MTU3_HOST=y
Nit: CONFIG_USB_MTU3_HOST is selected by default and can be dropped: USB_XHCI_HCD selects USB_HOST, and USB_GADGET is not set, so the MTU3 mode choice already defaults to USB_MTU3_HOST. -- Julien Stephan <[email protected]>
