I don't think I'm fully understanding your problem, but, I did notice this piece in your post...
"There's nothing in the LOGIN paragraph that appears to be altering the settings. I'm using KDE Konsole as the emulator which sends a term type of "xterm"." I have never had luck with xterm emulation for any MV system (be it QM, Universe, etc.) You are probably better off setting your KDE konsole session to vt100 and sorting it out from there. Don't quote me on this, but, I don't believe most MV systems have a proper term definition for xterm. Just a thought, as I have had similar pains in the past... On Mon, Apr 30, 2012 at 7:11 AM, Bob Little <[email protected]> wrote: > Thanks for the replies everyone. > > Yup. I know I can set my tty settings via PTERM. I really should have > worded my question differently: > > "What causes my system to switch tty settings simply by logging from the > UV account to my development account?" > > I'm old enough to remember that break is a condition not an actual > character. Uhhh... just *barely* old enough. :) I actually wrote a Wyse > 50 emulator and modem dialer a long time ago. Did it in x86 assembly > language too for some reason. (Grandpa - what's a "modem"? ) > > Anyway - Here's a screen dump of the settings and the change. It starts > by changing to my development account, showing the settings, logto the UV > account and show the settings, then doing LOGTO back to my dev account and > showing the settings there. > > There's nothing in the LOGIN paragraph that appears to be altering the > settings. I'm using KDE Konsole as the emulator which sends a term type of > "xterm". > > rlittle@mustang:/usr/uvuser$ uv > UniVerse Command Language 11.1 > Copyright Rocket Software, Inc. 1985-2011. All rights reserved. > uvuser logged on: Mon Apr 30 06:15:34 2012 > > :PTERM DISPLAY > MODE EMULATE > CC INTR = ^C QUIT = ^\ SUSP = OFF DSUSP = OFF > SWITCH = OFF ERASE = DEL > WERASE = OFF KILL = ^U LNEXT = OFF REPRINT = OFF EOF > = ^D EOL = ^@ > EOL2 = ^@ FLUSH = OFF START = ^Q STOP = ^S > LCONT = ^_ FMC = ^^ > VMC = ^] SMC = ^\ TMC = ^T SQLNULL = ^N > INPUTCTL ON > CARRIER RECEIVE -HANGUP -LOCAL > CASE -UCIN -UCOUT -XCASE -INVERT > CRMODE -INLCR -IGNCR ICRNL ONLCR -OCRNL -ONOCR -ONLRET -CRONLY > DELAY BS0 CR0 FF0 LF0 VT0 TAB0 -FILL > ECHO ECHO ERASE=BSB KILL=LF CTRL -LF > HANDSHAKE XON -ANY TANDEM -DTR > OUTPUT POST -TILDE -BG CS -EXPAND > PROTOCOL LINE=0 BAUD=38400 DATA=8 STOP=1 NONE DISABLE -STRIP > SIGNALS ENABLE FLUSH BREAK=NULL > :SH > rlittle@mustang:/usr/uvuser$ stty -a > speed 38400 baud; rows 38; columns 109; line = 0; > intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 > = <undef>; swtch = <undef>; > start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; > flush = ^O; min = 1; time = 0; > -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts > -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon > ixoff -iuclc -ixany -imaxbel -iutf8 > opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 > vt0 ff0 > isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop > -echoprt echoctl echoke > rlittle@mustang:/usr/uvuser$ exit > :LOGTO UV > UniVerse System Administration > Package Accounts Recovery Spooler sh Mem Import Devices > > > :PTERM DISPLAY > MODE EMULATE > CC INTR = ^C QUIT = ^\ SUSP = OFF DSUSP = OFF > SWITCH = OFF ERASE = DEL > WERASE = OFF KILL = ^U LNEXT = OFF REPRINT = OFF EOF > = ^D EOL = ^@ > EOL2 = ^@ FLUSH = OFF START = ^Q STOP = ^S > LCONT = ^_ FMC = ^^ > VMC = ^] SMC = ^\ TMC = ^T SQLNULL = ^N > INPUTCTL ON > CARRIER RECEIVE -HANGUP -LOCAL > CASE -UCIN -UCOUT -XCASE -INVERT > CRMODE -INLCR -IGNCR ICRNL ONLCR -OCRNL -ONOCR -ONLRET -CRONLY > DELAY BS0 CR0 FF0 LF0 VT0 TAB0 -FILL > ECHO ECHO ERASE=BSB KILL=LF CTRL -LF > HANDSHAKE XON -ANY TANDEM -DTR > OUTPUT POST -TILDE -BG CS -EXPAND > PROTOCOL LINE=0 BAUD=38400 DATA=8 STOP=1 NONE DISABLE -STRIP > SIGNALS ENABLE FLUSH BREAK=NULL > :SH > rlittle@mustang:/usr/uv$ stty -a > speed 38400 baud; rows 38; columns 109; line = 0; > intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 > = <undef>; swtch = <undef>; > start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; > flush = ^O; min = 1; time = 0; > -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts > -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon > ixoff -iuclc -ixany -imaxbel -iutf8 > opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 > vt0 ff0 > isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop > -echoprt echoctl echoke > rlittle@mustang:/usr/uv$ exit > :LOGTO UVUSER > > > --########-----------##-------------#####----##-----##----#######----########-- > > --##-----##--------##--##----------##--------##----##-----##------------##----- > > --##------##------##----##--------##---------##---##------##------------##----- > > --##-----##------##------##------##----------##--##-------##------------##----- > > --########------##--------##----##-----------####---------#####---------##----- > > --##--##---------##------##------##----------##-##--------##------------##----- > > --##---##---------##----##--------##---------##--##-------##------------##----- > > --##----##---------##--##----------##--------##---##------##------------##----- > > --##-----##----------##-------------#####----##----##-----#######-------##----- > > ------------------------------------------------------------------------------- > S O F T W A R E > > ------------------------------------------------------------------------------- > \251 Rocket Software, Inc. 1985-2011. > -- All rights reserved. > > :PTERM DISPLAY > MODE EMULATE > CC INTR = DEL QUIT = ^\ SUSP = ^Z DSUSP = OFF > SWITCH = OFF ERASE = ^H > WERASE = ^W KILL = ^X LNEXT = ^V REPRINT = ^R EOF > = ^D EOL = OFF > EOL2 = ^@ FLUSH = ^O START = ^Q STOP = ^S > LCONT = ^_ FMC = ^^ > VMC = ^] SMC = ^\ TMC = ^T SQLNULL = ^N > INPUTCTL ON > CARRIER RECEIVE -HANGUP -LOCAL > CASE -UCIN -UCOUT -XCASE -INVERT > CRMODE -INLCR -IGNCR ICRNL ONLCR -OCRNL -ONOCR -ONLRET -CRONLY > DELAY BS0 CR0 FF0 LF0 VT0 TAB0 -FILL > ECHO ECHO ERASE=BSB KILL=BS CTRL -LF > HANDSHAKE XON -ANY TANDEM -DTR > OUTPUT POST -TILDE -BG CS EXPAND > PROTOCOL LINE=0 BAUD=38400 DATA=8 STOP=1 NONE DISABLE -STRIP > SIGNALS ENABLE FLUSH BREAK=NULL > :SH > rlittle@mustang:/usr/uvuser$ stty -a > speed 38400 baud; rows 38; columns 109; line = 0; > intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 > = <undef>; swtch = <undef>; > start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; > flush = ^O; min = 1; time = 0; > -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts > -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon > ixoff -iuclc -ixany -imaxbel -iutf8 > opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 > vt0 ff0 > isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop > -echoprt echoctl echoke > rlittle@mustang:/usr/uvuser$ exit > : > > bob little > independent contractor > market america, inc. > 1302 pleasant ridge rd. > greensboro, nc 27409 > 248-675-5515 > > ________________________________________ > From: [email protected] [ > [email protected]] on behalf of Wjhonson [ > [email protected]] > Sent: Sunday, April 29, 2012 12:40 PM > To: [email protected] > Subject: Re: [U2] Backspace sends break signal in UV > > Bob at TCL type PTERM during a session where the backspace does a break, > and post the text of that to us > It's very likely that you have the INTR defined as your backspace > > _______________________________________________ > U2-Users mailing list > [email protected] > http://listserver.u2ug.org/mailman/listinfo/u2-users > _______________________________________________ > U2-Users mailing list > [email protected] > http://listserver.u2ug.org/mailman/listinfo/u2-users > -- John Thompson _______________________________________________ U2-Users mailing list [email protected] http://listserver.u2ug.org/mailman/listinfo/u2-users
